Effect of Particle Shape on the Mechanical Behavior of Natural Sands
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 142, Issue 12
Abstract
A database of the mechanical behavior of 25 natural sands was compiled from the existing literature. Particle shape and size analysis, obtained by dynamic imaging analysis, for each material in the database has subsequently been linked to its mechanical properties; selected sands were also subject to interferometry study for particle surface roughness measurements. This paper reviews the effect of the particle shape properties of these sands on their Critical State and stiffness parameters, introducing a new parameter to optimize the correlations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Dr. Catherine O’Sullivan of Imperial College London for making the QicPic apparatus available for this research.
References
Altuhafi, F., and Baudet, B. (2011). “A hypothesis on the relative role of crushing and abrasion in the mechanical genesis of a glacial sediment.” Eng. Geol., 120(1–4), 1–9.
Altuhafi, F., O’sullivan, C., and Cavarretta, I. (2013). “Analysis of an image-based method to quantify the size and shape of sand particles.” J. Geotech. Geoenviron. Eng., 1290–1307.
Altuhafi, F. N., Baudet, B., and Sammonds, P. (2010). “The mechanics of subglacial sediment: An example of new transitional behavior.” Can. Geotech. J., 47(7), 775–790.
Altuhafi, F. N., and Coop, M. R. (2011). “Changes to particle characteristics associated with the compression of sands.” Géotechnique, 61(6), 459–471.
Alvarado, G. (2007). “Influence of late cementation on the behaviour of reservoir sands.” Ph.D. thesis, Imperial College London, London.
Alvarado, G., Lui, N., and Coop, M. R. (2012). “Effect of fabric on the behavior of reservoir sandstones.” Can. Geotech. J., 49(9), 1036–1051.
Amat, A. S. (2007). “Elastic stiffness moduli of Hostun sand.” M.Sc. thesis, Dept. of Civil Engineering, Univ. of Bristol, Bristol, U.K.
Barret, P. J. (1980). “The shape of rock particles: A critical review.” Sedimentology, 27(3), 291–303.
Bellotti, R., Jamiolkowski, M., Presti, D. C. F., and O’Neill, D. A. (1996). “Anisotropy of small strain stiffness in Ticino sand.” Géotechnique, 46(1), 115–131.
Biarez, J., and Hicher, P. Y. (1994). Elementary mechanics of soil behaviour: Saturated remoulded soils, Balkema, Rotterdam, Netherlands.
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Géotechnique, 36(1), 65–78.
Carrera, A., Coop, M. R., and Lancellotta, R. (2011). “Influence of grading on the mechanical behaviour of Stava tailings.” Géotechnique, 61(11), 935–946.
Cascante, G., and Santamarina, J. C. (1996). “Inter-particle contact behavior and wave propagation”. J. Geotech. Eng., 831–839.
Cavarretta, I. (2009). “The influence of particle characteristics on the engineering behaviour of granular materials.” Ph.D. thesis, Imperial College London, London.
Cavarretta, I., Coop, M. R., and O’sullivan, C. (2010). “The influence of particle characteristics on the behaviour of coarse grained soils.” Géotechnique, 60(6), 413–423.
Chillarige, A. V., Robertson, P. K., Morgenstern, N. R., and Christian, H. A. (1997). “Evaluation of the in situ state of Fraser River sand.” Can. Geotech. J., 34(4), 510–519.
Cho, G., Dodds, J., and Santamarina, J. C. (2006). “Particle shape effects on packing density, stiffness, and strength: Natural and crushed sands.” J. Geotech. and Geoenviron. Eng., 591–602.
Consoli, N. C., Casagrande, M., and Coop, M. R. (2005). “Effect of fiber reinforcement on the isotropic compression behavior of sand.” J. Geotech. Geoenviron. Eng., 1431–1436.
Coop, M. R., and Lee, I. K. (1993). “The behaviour of granular soils at elevated stresses.” Predictive soil mechanics: Proc., Worth Memorial Symp., G. T. Houlsby and A. N. Schofield, eds., Thomas Telford, London, 186–198.
Cuccovillo, T., and Coop, M. R. (1997). “The measurement of local axial strains in triaxial testing using LVDTs.” Géotechnique, 47(1), 167–171.
Dano, C., and Hicher, P. Y. (2003). “Behaviour of uncemented sands and grouted sands before peak strength.” Soils Found., 43(4), 13–19.
Delfosse-Ribay, E., Djeran-Maigre, I., Cabrillac, R., and Gouvenot, D. (2004). “Shear modulus and damping ratio of grouted sand.” Soil Dyn. Earthquake Eng., 24(6), 461–471.
Duttine, A., and Tatsuoka, F. (2009). “Viscous properties of granular materials having different particle shapes in direct shear.” Soils Found., 49(5), 777–796.
Georgiannou, V. N. (2011). “Behavioural patterns of fine sands.” Geotech. Eng. J., 42(4), 26–41.
Gibson, A. D. (1996). “Physical scale modelling of geotechnical structures at one-G.” Ph.D. thesis, California Institute of Technology, Pasadena, CA.
Hagerty, M. M., Hite, D. R., Ullrich, C. R., and Hagerty, D. J. (1993). “One-dimensional high pressure compression of granular media.” J. Geotech. Eng., 1–18.
Hardin, B. O., and Kalinski, M. E. (2005). “Estimating the shear modulus of gravelly soils.” J. Geotech. Geoenviron. Eng., 867–875.
Hardin, B. O., and Richart, F. E., Jr. (1963). “Elastic wave velocities in granular soils.” J. Soil Mech. Found. Div., 89(1), 33–65.
Heineck, K. S., Coop, M. R., and Consoli, N. C. (2005). “Effect of micro-reinforcement of soils from very small to large shear strains.” J. Geotech. Geoenviron. Eng., 1024–1033.
Hicher, P. Y., Dano, C., and Chang, C. S. (2008). “A microstructural model for cemented sand.” 12th Int. Conf. (IACMAG), Goa, India, 661–668.
Hira, M., Hashiguchi, K., Ueno, M., and Okayasu, T. (2006). “Deformation behaviour of Shirasu soil by the extended subloading surface model.” Lowland Technol. Int., 8(1), 37–46.
Hyodo, M., Aramaki, N., and Nakata, Y. (1999). “Particle crushing and undrained shear behaviour of sand.” Proc., 9th Int. Offshore and Polar Engineering Conf., Vol. 1, J. S. Chung, T. Matsui, and W. Koterayama, eds., France, 785–791.
ISO. (2006). “Representation of results of particle size analysis: Part 1–6. Part 6: Descriptive and quantitative representation of particle shape and morphology.” ISO/DIS 9276, Geneva.
Iwasaki, T., and Tatsuoka, F. (1977). “Effects of grain size and grading on dynamic shear moduli of sands.” Soils Found., 17(3), 19–35.
Jovicic, V., and Coop, M. R. (1997). “Stiffness of coarse-grained soils at small strains.” Géotechnique, 47(3), 545–561.
Kato, Y., Nakata, Y., Hyodo, M., and Murata, H. (2001). “One-dimensional compression properties of crushable soils related to particle characteristics.” Proc., 14th Southeast Asian Geotechnical Conf., Geotechnical Engineering Meeting Society’s Meet, K. K. S. Ho and K. S. Li, eds., Southeast Asian Geotechnical Society (SEAGS), Pathumthani, Thailand, 527–532.
Krumbein, W. C., and Sloss, L. L. (1963). Stratigraphy and sedimentation, 2nd Ed., Freeman and Company, San Francisco.
Kuwano, R. (1999). “The stiffness and yielding anisotropy of sands.” Ph.D. thesis, Imperial College London, London.
Lee, D. M. (1992). “The angles of friction of granular fills.” Ph.D. thesis, Cambridge Univ., Cambridge, U.K.
Lees, G. (1964). “A new method for determining the angularity of particles.” Sedimentology, 3(1), 2–21.
Lesniewska, D., and Muir Wood, D. (2011). “Photoelastic and photographic study of a granular material.” Géotechnique, 61(7), 605–611.
Li, Y. (2013). “Effects of particle shape and size distribution on the shear strength behavior of composite soils.” Bull. Eng. Geol. Environ., 72(3-4), 371–381.
Lo Presti, D. C. F., Jamiolkowski, M., Pallara, O., Cavallararo, A., and Pedroni, S. (1997). “Shear modulus and damping of soils.” Géotechnique, 47(3), 603–617.
McDowell, G., and Bolton, M. (1998). “On the micromechanics of crushable aggregates.” Géotechnique, 48(5), 667–679.
Menq, F. Y., and Stokoe, K. H. (2003). “Linear dynamic properties of sandy and gravely soils from large scale resonant column tests.” Deformation characteristics of geomaterials, H. Di Benedetto, et al., eds., Swets & Zeitlinger, Lisse, Netherlands, 63–71.
Mitchell, J. K., and Soga, K. (2005). Fundamentals of soil behavior, 3rd Ed., Wiley, Chichester, U.K., 577.
Muira, K., Maeda, K., Furukawa, M., and Toki, S. (1997). “Physical characteristics of sand with different primary properties.” Soils Found., 37(3), 53–64.
Muir Wood, D. (2008). “Critical states and soil modelling. Keynote address.” Proc., 4th Int. Symp. on Deformation Characteristics of Geomaterials, S. E. Burns, P. W. Mayne, and J. C. Santamarina, eds., IOS Press, Amsterdam, Netherlands, 51–72.
Nakata, Y., Kato, Y., Hyodo, M., Murata, M., and Hyde, A. F. L. (1999). “Single particle crushing of the mechanical behavior of sand.” Pre-failure deformation characteristics of geomaterials, M. Jamiolkowski, R. Lancellotta, and D. Lo Presti, eds., Balkema, Rotterdam, Netherlands, 221–228.
Otsubo, M., O’sullivan, C., Sim, W. W., and Ibraim, E. (2015). “Quantitative assessment of the influence of surface roughness on soil stiffness.” Géotechnique, 65(8), 694–700.
Powers, M. C. (1953). “A new roundness scale for sedimentary particles.” J. Sediment. Res., 23(2), 117–119.
Rouse, P. C. (2005). “Characterization and modelling of a uniformly graded, well-rounded coarse sand.” M.Sc. thesis, Univ. of Chile, Metropolitana, Chile.
Rouse, P. C., Fannin, R. J., and Taiebat, M. (2014). “Sand strength for back-analysis of pull-out tests at large displacement.” Géotechnique, 64(4), 320–324.
Sacerdotti, F., Griffiths, B., Benati, F., and Kang, H. (2000). “The variability of functional and amplitude three-dimensional roughness parameters for electron-beam and electro-discharged textured surfaces.” Measmt Sci. Technol., 11(3), 171–177.
Salgado, R., Bandini, P., and Karim, A. (2000). “Shear strength and stiffness of silty sand.” J. Geotech. Geoenviron. Eng., 451–462.
Santamarina, J. C., and Cascante, G. (1998). “Effect of surface roughness on wave propagation parameters.” Géotechnique, 48(1), 129–136.
Santamarina, J. C., and Cho, G. C. (2001). “Determination of critical state parameters in sandy soils—Simple procedure.” Geotech. Test. J., 24(2), 185–192.
Saxena, S. K., and Reddy, K. R. (1989). “Dynamic moduli and damping ratios for Monterey No. 0 sand by R.C. tests.” Soils Found., 29(2), 37–51.
Schanz, T., and Venneer, P. A. (1996). “Angles of friction and dilatancy of sand.” Géotechnique, 46(1), 145–151.
Silva dos Santos, A. P., Consoli, N. C., Heineck, K. S., and Coop, M. R. (2010). “High-pressure isotropic compression tests on fiber-reinforced cemented sand.” J. Geotech. Geoenviron. Eng., 885–890.
Sympatec version 5.4.1.0 [Computer software]. Sympatec GmbH, Clausthal-Zellerfeld, Germany.
Tatsuoka, F., Di Benedetto, H., Enomoto, T., Kawabe, S., and Kongkitkul, W. (2008). “Various viscosity types of geomaterials in shear and their mathematical expression.” Soils Found., 48(1), 41–60.
Tsomokos, A., and Georgiannou, V. N. (2010). “Effect of grain shape and angularity on the undrained response of fine sands.” Can. Geotech. J., 47(5), 539–551.
Ventouras, K., and Coop, M. R. (2009). “On the behaviour of Thanet Sand: An example of an uncemented natural sand.” Géotechnique, 59(9), 727–738.
Verdugo, R. (1992). “The critical state of sands discussion.” Géotechnique, 42(4), 655–663.
Verdugo, R., and Ishihara, K. (1996). “The steady state of sand soils.” Soils Found., 36(2), 81–91.
Wadell, H. A. (1932). “Volume, shape, and roundness of rock particles”. J. Geol., 40(5), 443–451.
Wichtmann, T., and Triantafyllidis, T. (2009). “Influence of the grain-size distribution curve of quartz sand on the small strain shear modulus Gmax.” J. Geotech. Geoenviron. Eng., 1404–1418.
Wichtmann, T., and Triantafyllidis, T. (2014). “Stiffness and damping of clean quartz sand with various grain-size distribution curves.” J. Geotech. Geoenviron. Eng., 06013003.
Wroth, C. P., and Houlsby, G. T. (1985). “Soil mechanics, property characterization and analysis procedure.” Proc., 11th Int. Conf. on Soil Mechanics and Foundations Engineering (ICSMFE), Belkema, Rotterdam, Netherlands, 1–55.
Yamamuro, J. A., and Lade, P. V. (1997). “Static liquefaction of very loose sands.” Can. Geotech. J., 6, 905–917.
Yoshimoto, N., Hyodo, M., Nakata, M., Orense, R., Hongo, T., and Ohnaka, A. (2012). “Evaluation of shear strength and mechanical properties of granulated coal ash based on single particle strength.” Soils Found., 52(2), 321–334.
Yoshimura, Y., and Ogawa, S. (1993). “A simple quantification method of grain shape of granular materials.” Proc. Jpn Soc. Civ. Eng., 463, 95–103 (in Japanese).
Youd, T. (1972). “Factors controlling maximum and minimum densities of sands.” Evaluation of relative density and its role in geotechnical projects involving cohesionless soils, E. T. Selig and R. S. Ladd, eds., ASTM, Los Angeles, 98–112.
Youn, J. U., Choo, Y. W., and Kim, D. S. (2008). “Measurement of small-strain shear modulus of dry and saturated sands by bender element, resonant column, and torsional shear tests.” Can. Geotech. J., 45(10), 1426–1438.
Yun, T. S., and Santamarina, J. C. (2005). “De-cementation, softening, and collapse: Changes in small-strain shear stiffness in loading.” J. Geotech. Geoenviron. Eng., 350–358.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 30, 2015
Accepted: Apr 28, 2016
Published online: Jul 18, 2016
Published in print: Dec 1, 2016
Discussion open until: Dec 18, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.