Technical Papers
Jan 18, 2018

Ball Valve Behavior under Steady and Unsteady Conditions

Publication: Journal of Hydraulic Engineering
Volume 144, Issue 4

Abstract

The aim of this paper is the experimental characterization of a ball valve under steady and unsteady conditions, based on experimental tests carried out in a pressurized pipe system assembled at Instituto Superior Técnico. Data analysis showed that the response of the valve under steady-state conditions depends not only on the valve geometry and closure percentage, but also on the flow regime (i.e., Reynolds number); the comparison with values published in literature confirmed that typical valve head loss curves presented in manuals and textbooks refer to turbulent flows. The behavior under unsteady conditions was also analyzed based on transient pressure head measurements showing that the valve effective closure time varies between 4 and 10% of the total time of the maneuver. Two mathematical functions (hyperbolic and sigmoidal) are proposed to describe the discharge variation as a function of the total time of the maneuver and of the initial steady-state discharge; the most appropriate function depends on the simplifications imposed on the hydraulic transient simulator. A computational fluid dynamics (CFD) model was used to support the observed experimental behavior and to highlight the effect of the pipe length on the discharge variation.

Get full access to this article

View all available purchase options and get full access to this article.

References

AISI (American Iron and Steel Institute). (2017). “Stainless steel CF8M-casting material standard.” AISI 316, Washington, DC.
Almeida, A. B., and Koelle, E. (1992). Fluid transients in pipe networks, 1st Ed., Computational Mechanics Publications, Southampton, U.K.
ANSYS Fluent [Computer software]. ANSYS, Inc., Canonsburg, PA.
Bergant, A., Tijsseling, A. S., Vitkovsky, J. P., Covas, D. I. C., Simpson, A. R., and Lambert, M. F. (2008). “Parameters affecting water-hammer wave attenuation, shape and timing. 1: Mathematical tools.” J. Hydraul. Res., 46(3), 373–381.
Brito, M., Sanches, P., Ferreira, R. M., and Covas, D. I. C. (2014). “PIV characterization of transient flow in pipe coils.” Procedia Eng., 89, 1358–1365.
Brunone, B., and Morelli, L. (1999). “Automatic control valve-induced transients in operative pipe system.” J. Hydraul. Eng., 534–542.
Chaudhry, M. H. (2014). Applied hydraulic transients, 3rd Ed., Springer, New York.
Covas, D., Stoianov, I., Mano, J. F., Ramos, H., Graham, N., and Maksimovic, C. (2004). “The dynamic effect of pipe-wall viscoelasticity in hydraulic transients. I: Experimental analysis and creep characterization.” J. Hydraul. Res., 42(5), 517–532.
Covas, D., Stoianov, I., Mano, J. F., Ramos, H., Graham, N., and Maksimovic, C. (2005). “The dynamic effect of pipe-wall viscoelasticity in hydraulic transients. II: Model development, calibration and verification.” J. Hydraul. Res., 43(1), 56–70.
Dickenson, T. C. (1999). Valves, piping, and pipelines handbook, 3rd Ed., Elsevier, Oxford, U.K.
Ferrante, M., Brunone, B., and Meniconi, S. (2007). “Wavelets for the analysis of transient pressure signals for leak detection.” J. Hydraul. Eng., 1274–1282.
Ferrante, M., Brunone, B., and Meniconi, S. (2009). “Leak detection in branched pipe systems coupling wavelet analysis and a Lagrangian model.” J. Water Supply Res. Technol. AQUA, 58(2), 95–106.
Ferràs, D., Manso, P. A., Schleiss, A. J., and Covas, D. I. C. (2016). “Experimental distinction of damping mechanisms during hydraulic transients in pipe flow.” J. Fluids Struct., 66, 424–446.
Ghidaoui, M. S., Zhao, M., McInnis, D. A., and Axworthy, D. H. (2005). “A review of water hammer theory and practice.” Appl. Mech. Rev., 58(1), 49–76.
Idel’chik, I. E. (1996). Handbook of hydraulic resistance, 1st Ed., Begell House, Redding, CT.
ISO. (2017). “Industrial valves—Part-turn actuator attachments.” ISO 5211, Geneva.
Lescovich, J. E. (1967). “The control of water hammer by automatic valves.” Am. Water Works Assoc., 59(5), 632–644.
Mallat, S., and Hwang, W. L. (1992). “Singularity detection and processing with wavelets.” IEEE Trans. Inf. Theory, 38(2), 617–643.
Mallat, S., and Zhong, S. (1992). “Characterization of signals from multiscale edges.” IEEE Trans. Pattern Anal. Mach. Intell., 14(7), 710–732.
Martins, N. M. C., Delgado, J. N., Ramos, H. M., and Covas, D. I. C. (2017). “Maximum transient pressures in a rapidly filling pipeline with entrapped air using a CFD model.” J. Hydraul. Res., 55(4), 506–519.
Martins, N. M. C., Soares, A. K., Ramos, H. M., and Covas, D. I. C. (2016). “CFD modeling of transient flow in pressurized pipes.” Comput. Fluids, 126, 129–140.
Meniconi, S., Brunone, B., and Ferrante, M. (2011). “In-line pipe device checking by short-period analysis of transient tests.” J. Hydraul. Eng., 713–722.
Meniconi, S., Brunone, B., Ferrante, M., and Massari, C. (2012). “Transient hydrodynamics of in-line valves in viscoelastic pressurized pipes: Long-period analysis.” Exp. Fluids, 53(1), 265–275.
Miller, D. S. (1990). Internal flow systems, 1st Ed., BHRA (Information Services), Cranfield, U.K.
Moujaes, S. F., and Jagan, R. (2008). “3D CFD predictions and experimental comparisons of pressure drop in a ball valve at different partial openings in turbulent flow.” J. Energy Eng., 24–28.
Nerella, R., and Rathnam, E. V. (2015). “Fluid transients and wave propagation in pressurized conduits due to valve closure.” Procedia Eng., 127, 1158–1164.
Nesbitt, B. (2007). Handbook of valves and actuators: Valves manual international, 1st Ed., Elsevier Science, Oxford, U.K.
Soares, A. K., Covas, D. I. C., and Ramos, H. M. (2013). “Damping analysis of hydraulic transients in pump-rising main systems.” J. Hydraul. Eng., 233–243.
Soares, A. K., Martins, N. M. C., and Covas, D. I. C. (2017). “Transient vaporous cavitation in a horizontal copper pipe.” J. Hydraul. Res., 55(5), 731–736.
Tian, X., Zhang, S. X.-Y., Valade, M., and Young, P. (2013). “Head loss through pipe fittings for laminar flows.” Pipelines 2013: Pipelines and Trenchless Construction and Renewals—A Global Perspective, ASCE Pipeline Division, Fort Worth, TX, 301–308.
Tullis, J. P. (1989). Hydraulics of pipelines: Pumps, valves, cavitation, transients, 1st Ed., Wiley, New York.
Vardy, A. E., and Brown, J. M. B. (2003). “Transient turbulent friction in smooth pipe flows.” J. Sound Vibr., 259(5), 1011–1036.
White, F. M. (2010). A brief introduction to fluid mechanics, 5th Ed., Wiley, Hoboken, NJ.
Wylie, E. B., and Streeter, V. L. (1993). Fluid transients in systems, 1st Ed., Prentice Hall, Englewood Cliffs, NJ.
Yang, S., Wu, D., Lai, Z., and Du, T. (2016). “Three-dimensional computational fluid dynamics simulation of valve-induced water hammer.” J. Mech. Eng. Sci., 231(12), 2263–2274.
Zielke, W. (1968). “Frequency-dependent friction in transient pipe flow.” J. Basic Eng., 90(1), 109–115.

Information & Authors

Information

Published In

Go to Journal of Hydraulic Engineering
Journal of Hydraulic Engineering
Volume 144Issue 4April 2018

History

Received: Feb 3, 2017
Accepted: Sep 19, 2017
Published online: Jan 18, 2018
Published in print: Apr 1, 2018
Discussion open until: Jun 18, 2018

Permissions

Request permissions for this article.

Authors

Affiliations

João Paulo B. C. C. Ferreira [email protected]
Research Fellow, Civil Engineering Research and Innovation for Sustainability, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisbon, Portugal (corresponding author). E-mail: [email protected]
Nuno M. C. Martins [email protected]
Postdoctoral Research Fellow, Civil Engineering Research and Innovation for Sustainability, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisbon, Portugal. E-mail: [email protected]
Dídia I. C. Covas [email protected]
Associate Professor, Civil Engineering Research and Innovation for Sustainability, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisbon, Portugal. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share