Developing Automation Adoption Readiness Index for Quality Management Focused on Highway Construction
Publication: Journal of Infrastructure Systems
Volume 27, Issue 1
Abstract
The construction industry is stigmatized by low-quality performance at the end of product delivery. The poor performance quality sometimes observed in highway construction leads to reduced service life and requires urgent attention. Although innovations such as increased reliance on automation have helped improved quality in other industries, the construction industry relies primarily on traditional and conventional procedures. To improve the adoption of automation in highway construction, stakeholders should be provided with information that can enhance their decision making. This study identifies the critical readiness indicators of construction automation adoption readiness (AAR) and proposes a process for assessing quality management (QM) AAR using a fuzzy index model. A survey was conducted among experienced highway construction professionals with knowledge of QM and automated systems within the US. Results indicate that the external indicators have the most impact on determining AAR, whereas technological indicators have the least impact. Findings from the study facilitate prioritization of adoption indicators and a robust readiness assessment during technology integration. Using the results of the present study and presented process, organizations involved in integrating automation with construction QM operations can improve the odds of successful implementation of automation on highway construction projects.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request and in accordance with University of Alabama Institutional Review Board (IRB) policies.
References
Acharya, N. K., Y. Dai Lee, and H. M. Im. 2006. “Conflicting factors in construction projects: Korean perspective.” Eng. Constr. Archit. Manage. 13 (6): 543–566. https://doi.org/10.1108/09699980610712364.
Ameyaw, E. E., A. P. C. Chan, D. G. Owusu-Manu, D. J. Edwards, and F. Dartey. 2017. “A fuzzy-based evaluation of financial risks in build-own-operate-transfer water supply projects.” J. Infrastruct. Syst. 23 (4): 04017033. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000390.
Azar, E. R., G. Agnew, and A. Parker. 2015. “Effectiveness of automated machine guidance technology in productivity improvement: Case study.” In Proc., 5th Int. Construction Specialty Conf., 269-2–269-10. Vancouver, BC: Univ. of British Columbia. https://doi.org/10.14288/1.0076433.
Battikha, M. G. 2003. “Quality management practice in highway construction.” Int. J. Qual. Reliab. Manage. 20 (5): 532–550. https://doi.org/10.1108/02656710310476516.
Blayse, A. M., and K. Manley. 2004. “Key influences on construction innovation.” Constr. Innov. 4 (3): 143–154. https://doi.org/10.1108/14714170410815060.
Bock, T. 2015. “The future of construction automation: Technological disruption and the upcoming ubiquity of robotics.” Autom. Constr. 59 (Nov): 113–121. https://doi.org/10.1016/j.autcon.2015.07.022.
Broniatowski, D. A., and C. Tucker. 2017. “Assessing causal claims about complex engineered systems with quantitative data: Internal, external, and construct validity.” Syst. Eng. 20 (6): 483–496. https://doi.org/10.1002/sys.21414.
Castro-Lacouture, D. 2009. “Construction automation.” In Handbook of automation, 1063–1078. Berlin: Springer. https://doi.org/10.1007/978-3-540-78831-7_61.
Ceballos, B., M. T. Lamata, and D. A. Pelta. 2016. “A comparative analysis of multi-criteria decision-making methods.” Prog. Artif. Intell. 5 (4): 315–322. https://doi.org/10.1007/s13748-016-0093-1.
Chahal, K. S., and P. Emerson. 2007. “Quality control and quality assurance in building design and construction.” J. Inst. Eng. (India): Archit. Eng. Div. 88 (29): 16–20.
Chan, A. P. C., P. T. I. Lam, D. W. M. Chan, E. Cheung, and Y. Ke. 2009. “Drivers for adopting public private partnerships-empirical comparison between China and Hong Kong special administrative region.” J. Constr. Eng. Manage. 135 (11): 1115–1124. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000088.
Chandra, S., and K. N. Kumar. 2018. “Exploring factors influencing organizational adoption of augmented reality in e-commerce: Empirical analysis using technology-organization-environment model.” J. Electron. Commer. Res. 19 (3): 237–265.
Chen, L., and H. Luo. 2014. “A BIM-based construction quality management model and its applications.” Autom. Constr. 46 (Oct): 64–73. https://doi.org/10.1016/j.autcon.2014.05.009.
Cheng, G. J., L. T. Liu, X. J. Qiang, and Y. Liu. 2017. “Industry 4.0 development and application of intelligent manufacturing.” In Proc., 2016 Int. Conf. on Information System and Artificial Intelligence, ISAI 2016, 407–410. New York: IEEE. https://doi.org/10.1109/ISAI.2016.0092.
Chudy-Laskowska, K. 2018. “Factors influencing the decision to implement an RFID system.” LogForum 14 (2): 221–233. https://doi.org/10.17270/J.LOG.279.
Cox, R. F., R. R. A. Issa, and D. Ahrens. 2003. “Management’s perception of key performance indicators for construction.” J. Constr. Eng. Manage. 129 (2): 142–151. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:2(142).
Darko, A., A. P. C. Chan, E. E. Ameyaw, B. J. He, and A. O. Olanipekun. 2017a. “Examining issues influencing green building technologies adoption: The United States green building experts’ perspectives.” Energy Build. 144 (Jun): 320–332. https://doi.org/10.1016/j.enbuild.2017.03.060.
Darko, A., C. Zhang, and A. P. C. Chan. 2017b. “Drivers for green building: A review of empirical studies.” Habitat Int. 60 (Feb): 34–49. https://doi.org/10.1016/j.habitatint.2016.12.007.
Dubois, A., and L. E. Gadde. 2002. “The construction industry as a loosely coupled system: Implications for productivity and innovation.” Constr. Manage. Econ. 20 (7): 621–631. https://doi.org/10.1080/01446190210163543.
Gonzalez de Santos, P., J. Estremera, E. Garcia, and M. Armada. 2008. “Power assist devices for installing plaster panels in construction.” Autom. Constr. 17 (4): 459–466. https://doi.org/10.1016/j.autcon.2007.08.006.
Hoonakker, P., P. Carayon, and T. Loushine. 2010. “Barriers and benefits of quality management in the construction industry: An empirical study.” Total Qual. Manage. Bus. Excell. 21 (9): 953–969. https://doi.org/10.1080/14783363.2010.487673.
Howarth, T., and D. Greenwood. 2018. Construction quality management. London: Routledge. https://doi.org/10.4324/9781315563657.
Hu, Y., A. P. C. Chan, Y. Le, Y. Xu, and M. Shan. 2016. “Developing a program organization performance index for delivering construction megaprojects in China: Fuzzy synthetic evaluation analysis.” J. Manage. Eng. 32 (4): 05016007. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000432.
Jayalakshmi, T., and A. Santhakumaran. 2011. “Statistical normalization and back propagation for classification.” Int. J. Comput. Theory Eng. 3 (1): 1793–8201.
Kamaruddin, S. S., M. F. Mohammad, and R. Mahbub. 2016. “Barriers and impact of mechanisation and automation in construction to achieve better quality products.” Procedia - Social Behav. Sci. 222 (Jun): 111–120. https://doi.org/10.1016/j.sbspro.2016.05.197.
Karimi, H., T. R. B. Taylor, and P. M. Goodrum. 2017. “Analysis of the impact of craft labour availability on North American construction project productivity and schedule performance.” Constr. Manage. Econ. 35 (6): 368–380. https://doi.org/10.1080/01446193.2017.1294257.
Kivimäki, T., and R. Heikkilä. 2015. “Infra BIM based real-time quality control of infrastructure construction projects.” In Vol. 32 of Proc., Int. Symp. on Automation and Robotics in Construction, 1. Kitakyshu, Kyushu: International Symposium on Automation and Robotics in Construction. https://doi.org/10.22260/isarc2015/0117.
Lam, P. T. I., and A. A. Javed. 2015. “Comparative study on the use of output specifications for Australian and UK PPP/PFI projects.” J. Perform. Constr. Facil. 29 (2): 04014061. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000554.
Leung, D., A. Lo, L. H. N. Fong, and R. Law. 2015. “Applying the technology-organization-environment framework to explore ICT initial and continued adoption: An exploratory study of an independent hotel in Hong Kong.” Tourism Recreation Res. 40 (3): 391–406. https://doi.org/10.1080/02508281.2015.1090152.
Li, B. H., B. C. Hou, W. T. Yu, X. B. Lu, and C. W. Yang. 2017. “Applications of artificial intelligence in intelligent manufacturing: A review.” Front. Inf. Technol. Electron. Eng. 18 (1): 86–96. https://doi.org/10.1631/FITEE.1601885.
Li, J., and P. X. W. Zou. 2011. “Fuzzy AHP-based risk assessment methodology for PPP projects.” J. Constr. Eng. Manage. 137 (12): 1205–1209. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000362.
Mane, P. P., and J. R. Patil. 2015. “Quality management system at construction project: A questionnaire survey.” Int. J. Eng. Res. Appl. 5 (3): 126–130.
Martínez-Rojas, M., N. Marín, and M. A. Vila. 2016. “The role of information technologies to address data handling in construction project management.” J. Comput. Civ. Eng. 30 (4): 04015064. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000538.
Mitropoulos, P., and C. B. Tatum. 2000. “Forces driving adoption of new information technologies.” J. Constr. Eng. Manage. 126 (5): 340–348. https://doi.org/10.1061/(ASCE)0733-9364(2000)126:5(340).
Ng, A., and M. Loosemore. 2007. “Risk allocation in the private provision of public infrastructure.” Int. J. Project Manage. 25 (1): 66–76. https://doi.org/10.1016/j.ijproman.2006.06.005.
Nikas, A., A. Poulymenakou, and P. Kriaris. 2007. “Investigating antecedents and drivers affecting the adoption of collaboration technologies in the construction industry.” Autom. Constr. 16 (5): 632–641. https://doi.org/10.1016/j.autcon.2006.10.003.
Nnaji, C., J. Gambatese, A. Karakhan, and C. Eseonu. 2019. “Influential safety technology adoption predictors in construction.” Eng. Constr. Archit. Manage. 26 (11): 2655–2681. https://doi.org/10.1108/ECAM-09-2018-0381.
Nnaji, C., J. Gambatese, A. Karakhan, and R. Osei-Kyei. 2020. “Development and application of safety technology adoption decision-making tool.” J. Constr. Eng. Manage. 146 (4): 04020028. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001808.
Nnaji, C., and A. A. Karakhan. 2020. “Technologies for safety and health management in construction: Current use, implementation benefits and limitations, and adoption barriers.” J. Build. Eng. 29 (May): 101212. https://doi.org/10.1016/j.jobe.2020.101212.
Ogunbiyi, O., A. Oladapo, and J. Goulding. 2014. “An empirical study of the impact of lean construction techniques on sustainable construction in the UK.” Constr. Innov. 14 (1): 88–107. https://doi.org/10.1108/CI-08-2012-0045.
Oliveira, T., and M. F. Martins. 2010. “Information technology adoption models at firm level: Review of literature.” In Proc., European Conf. Information Systems Management, 312. Reading, UK: Academic Conferences International Ltd.
Osei-Kyei, R., and A. P. C. Chan. 2017. “Developing a project success index for public-private partnership projects in developing countries.” J. Infrastruct. Syst. 23 (4): 04017028. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000388.
Osei-Kyei, R., A. P. C. Chan, A. Dansoh, J. K. Ofori-Kuragu, and G. D. Oppong. 2018. “Strategies for effective management of unsolicited public-private partnership proposals.” J. Manage. Eng. 34 (3): 04018006. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000598.
Ozorhon, B., and K. Oral. 2017. “Drivers of innovation in construction projects.” J. Constr. Eng. Manage. 143 (4): 04016118. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001234.
Pan, M., T. Linner, W. Pan, H. Cheng, and T. Bock. 2018. “A framework of indicators for assessing construction automation and robotics in the sustainability context.” J. Cleaner Prod. 182 (May): 82–95. https://doi.org/10.1016/j.jclepro.2018.02.053.
Pan, M., T. Linner, W. Pan, H. M. Cheng, and T. Bock. 2020. “Influencing factors of the future utilisation of construction robots for buildings: A Hong Kong perspective.” J. Build. Eng. 30 (Jul): 101220. https://doi.org/10.1016/j.jobe.2020.101220.
Rankin, J. H., and R. Luther. 2006. “The innovation process: Adoption of information and communication technology for the construction industry.” Can. J. Civ. Eng. 33 (12): 1538–1546. https://doi.org/10.1139/l05-128.
Ruikar, K., C. J. Anumba, and P. M. Carrillo. 2006. “VERDICT: An e-readiness assessment application for construction companies.” Autom. Constr. 15 (1): 98–110. https://doi.org/10.1016/j.autcon.2005.02.009.
Safa, M., A. Shahi, M. Nahangi, C. Haas, and H. Noori. 2015. “Automating measurement process to improve quality management for piping fabrication.” Structures 3 (Aug): 71–80. https://doi.org/10.1016/j.istruc.2015.03.003.
Schwatka, N. V., L. M. Butler, and J. R. Rosecrance. 2012. “An aging workforce and injury in the construction industry.” Epidemiol. Rev. 34 (1): 156–167. https://doi.org/10.1093/epirev/mxr020.
Song, S.-H., H.-S. Lee, and M. Park. 2004. “Development of quality performance indicators for quality management in construction projects.” Accessed February 10, 2010. https://www.irbnet.de/daten/iconda/CIB4419.pdf.
Takim, R., A. Akintoye, and J. Kelly. 2004. “Analysis of measures of construction project success in Malaysia.” Assoc. Res. Constr. Manage. 2 (9): 1123–1133.
Torres, H. N., M. J. Ruiz, G. K. Chang, J. L. Anderson, and S. I. Garber. 2018. Automation in highway construction. Part I: Implementation challenges at state transportation departments and success stories (No. FHWA-HRT-16-030). Washington, DC: Federal Highway Administration.
TRB (Transport Research Board). 2005. Glossary of highway quality assurance terms. Washington, DC: TRB.
Valerio, M. A., N. Rodriguez, P. Winkler, J. Lopez, M. Dennison, Y. Liang, and B. J. Turner. 2016. “Comparing two sampling methods to engage hard-to-reach communities in research priority setting.” BMC Med. Res. Methodol. 16 (1): 1–11. https://doi.org/10.1186/s12874-016-0242-z.
Vennapusa, P. K., D. J. White, and C. T. Jahren. 2015. “Impacts of automated machine guidance on earthwork operations.” Accessed November 16, 2018. https://lib.dr.iastate.edu/cgi/viewcontent.cgi?article=1032&context=ccee_conf.
Vermeulen, A., K. S. Nyakala, and J. H. C. Pretorius. 2018. “Development of a road quality assurance measurement tool in construction projects.” In Proc., 2018 Int. Conf. Management of Technology, 22–26. Coral Gables, FL: International Association for Management of Technology. https://www2.aston.ac.uk/migrated-assets/applicationpdf/aston-business-school/368250-IAMOT2018_paper_46.pdf.
Wanberg, J., C. Harper, M. R. Hallowell, and S. Rajendran. 2013. “Relationship between construction safety and quality performance.” J. Constr. Eng. Manage. 139 (10). https://doi.org/10.1061/(ASCE)CO.1943-7862.0000732.
Wang, L. C. 2008. “Enhancing construction quality inspection and management using RFID technology.” Autom. Constr. 17 (4): 467–479. https://doi.org/10.1016/j.autcon.2007.08.005.
Wang, Q., M. K. Kim, J. C. P. Cheng, and H. Sohn. 2016. “Automated quality assessment of precast concrete elements with geometry irregularities using terrestrial laser scanning.” Autom. Constr. 68 (Aug): 170–182. https://doi.org/10.1016/j.autcon.2016.03.014.
Winkler, D., and S. Biffl. 2012. “Improving quality assurance in automation systems development projects.” Qual. Assur. Manage. 20–40. https://doi.org/10.5772/33487.
Yang, L. R., J. T. O’Connor, and J. H. Chen. 2007. “Assessment of automation and integration technology’s impacts on project stakeholder success.” Autom. Constr. 16 (6): 725–733. https://doi.org/10.1016/j.autcon.2006.11.005.
Yoon, S., M. Hastak, and J. Lee. 2015. Intelligent compaction of asphalt pavement implementation. FHWA/IN/JTRP-2015/05. West Lafayette, IN: Purdue Univ. https://doi.org/10.5703/1288284315524.
Zhou, Z., J. Irizarry, and Q. Li. 2013. “Applying advanced technology to improve safety management in the construction industry: A literature review.” Constr. Manage. Econ. 31 (6): 606–622. https://doi.org/10.1080/01446193.2013.798423.
Information & Authors
Information
Published In
Journal of Infrastructure Systems
Volume 27 • Issue 1 • March 2021
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Apr 18, 2020
Accepted: Sep 18, 2020
Published online: Dec 15, 2020
Published in print: Mar 1, 2021
Discussion open until: May 15, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Karthik Subramanya, Sharareh Kermanshachi, Karthikeyan Loganathan, Apurva Pamidimukkala, Development of Effectiveness Index for Electronic Ticketing in Highway Construction, Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 10.1061/JLADAH.LADR-953, 15, 3, (2023).
- Ifeanyi Okpala, Chukwuma Nnaji, John Gambatese, Assessment Tool for Human–Robot Interaction Safety Risks during Construction Operations, Journal of Construction Engineering and Management, 10.1061/(ASCE)CO.1943-7862.0002432, 149, 1, (2023).
- Xichen Chen, Alice Chang-Richards, Florence Yean Yng Ling, Tak Wing Yiu, Antony Pelosi, Nan Yang, Developing a readiness model and a self-assessment tool for adopting digital technologies in construction organizations, Building Research & Information, 10.1080/09613218.2022.2136130, 51, 3, (241-256), (2022).
- Olugbenro Ogunrinde, Ifeanyi Okpala, Rapheal A. Ojelabi, Opeyemi Oyeyipo, Muhammad T. Hatamleh, Assessing Automation Readiness of Recurring Pavement Failure in Developing Countries: Case Studies of Nigeria and Jordan, Construction Research Congress 2022, 10.1061/9780784483978.093, (912-921), (2022).
- Goodenough D. Oppong, Albert P. C. Chan, Ernest E. Ameyaw, Samuel Frimpong, Ayirebi Dansoh, Fuzzy Evaluation of the Factors Contributing to the Success of External Stakeholder Management in Construction, Journal of Construction Engineering and Management, 10.1061/(ASCE)CO.1943-7862.0002155, 147, 11, (2021).