Technical Papers
Mar 31, 2017

Response Assessment under Dynamic Loading and Microstructural Investigations of Rubberized Concrete

Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 8

Abstract

Dynamic loading may severely compromise the functional performance of concrete. The present study examined the effects of the partial replacement of fine aggregates with rubber ash (0, 5, 10, 15, and 20%) and hybrid rubber waste (0, 5, 10, 15, 20, and 25% of rubber fiber with 10% constant rubber ash) on the response of concrete to impact and fatigue loading. Impact performance of the resulting concrete was examined using a drop weight test, flexural loading test, and rebound test. Fatigue performance was assessed using a servo-hydraulic fatigue machine. Regression analysis to establish a relationship between different impact tests was carried out. A two-parameter Weibull distribution was used to analyze the results of the drop weight and fatigue tests to facilitate ease of analysis. Scanning electron microscopy (SEM) and optical microscopy were deployed to investigate the microstructural attributes of the rubberized concrete. It was found that the incorporation of rubber ash and rubber fiber in concrete led to enhanced resilience toward impact and fatigue loading.

Get full access to this article

View all available purchase options and get full access to this article.

References

ACI (American Concrete Institute). (1999). “Measurement of properties of fiber reinforced concrete.” ACI 544.2R-89, West Conshohocken, PA.
Aiello, M. A., and Leuzzi, F. (2010). “Waste tyre rubberized concrete: Properties at fresh and hardened state.” Waste Manage., 30(8), 1699–1704.
Al-Hadithi, A. I., and Hilal, N. N. (2016). “The possibility of enhancing some properties of self-compacting concrete by adding waste plastic fibers.” J. Build. Eng., 8, 20–28.
Al-Tayeb, M. M., Bakar, B. H. A., Akil, H. M., and Ismail, H. (2013). “Performance of rubberized and hybrid rubberized concrete structures under static and impact load conditions.” Exp. Mech., 53(3), 377–384.
ASTM. (2013). “Standard test method for density, absorption, and voids in hardened concrete.” ASTM C642-13, West Conshohocken, PA.
Awal, A. A., and Mohammadhosseini, H. (2016). “Green concrete production incorporating waste carpet fiber and palm oil fuel ash.” J. Cleaner Prod., 137, 157–166.
Banyhussan, Q. S., Yıldırım, G., Bayraktar, E., Demirhan, S., and Şahmaran, M. (2016). “Deflection-hardening hybrid fiber reinforced concrete: The effect of aggregate content.” Constr. Build. Mater., 125, 41–52.
BIS (Bureau of Indian Standards). (1959). “Methods of tests for strength of concrete.” BIS 516, New Delhi, India.
Branston, J., Das, S., Kenno, S. Y., and Taylor, C. (2016). “Mechanical behaviour of basalt fibre reinforced concrete.” Constr. Build. Mater., 124, 878–886.
Caggiano, A., Gambarelli, S., Martinelli, E., Nisticò, N., and Pepe, M. (2016). “Experimental characterization of the post-cracking response in hybrid steel/polypropylene fiber-reinforced concrete.” Constr. Build. Mater., 125, 1035–1043.
Chan, Y. W., and Chu, S. H. (2004). “Effect of silica fume on steel fiber bond characteristics in reactive powder concrete.” Cem. Concr. Res., 34(7), 1167–1172.
Chan, Y. W., and Li, V. C. (1997). “Effects of transition zone densification on fiber/cement paste bond strength improvement.” Adv. Cem. Based Mater., 5(1), 8–17.
Chen, X., Ding, Y., and Azevedo, C. (2011). “Combined effect of steel fibers and steel rebars on impact resistance of high performance concrete.” J. South Cent. Univ. Tech., 18(5), 1677–1684.
Choi, S. J., Mun, J. S., Yang, K. H., and Kim, S. J. (2016). “Compressive fatigue performance of fiber-reinforced lightweight concrete with high-volume supplementary cementitious materials.” Cem. Concr. Compos., 73, 89–97.
Elavenil, S., and Knight, S. G. M. (2007). “Behaviour of steel fibre reinforced concrete beams and plates under static load.” J. Res. Sci. Comput. Eng., 4(3), 11–28.
Eldin, N. N., and Senouci, A. B. (1993). “Rubber-tire particles as concrete aggregate.” J. Mater. Civ. Eng., 478–496.
Emiroğlu, M., Keleştemur, M. H., and Yıldız, S. (2007). “An investigation on ITZ microstructure of the concrete containing waste vehicle tire.” Proc., 8th Int. Fracture Conf., Yildiz Technical Univ., Istanbul, Turkey.
Fatuhi, N. I., and Clark, L. A. (1996). “Cement-based materials containing tire rubber.” Constr. Build. Mater., 10(4), 229–236.
Ganesan, N., Raj, J. B., and Shashikala, A. P. (2013). “Flexural fatigue behavior of self compacting rubberized concrete.” Constr. Build. Mater., 44, 7–14.
Ghaly, A. M., and Cahill, J. D. (2005). “Correlation of strength, rubber content, and water to cement ratio in crumb rubber concrete.” Can. J. Civ. Eng., 32(6), 1075–1081.
Gupta, T., Chaudhary, S., and Sharma, R. K. (2014). “Assessment of mechanical and durability properties of concrete containing waste rubber tyre as fine aggregate.” Constr. Build. Mater., 73, 562–574.
Gupta, T., Chaudhary, S., and Sharma, R. K. (2016). “Mechanical and durability properties of waste rubber fiber concrete with and without silica fume.” J. Cleaner Prod., 112, 702–711.
Gupta, T., Sharma, R. K., and Chaudhary, S. (2015a). “Impact resistance of concrete containing waste rubber fiber and silica fume.” Int. J. Impact Eng., 83, 76–87.
Gupta, T., Sharma, R. K., and Chaudhary, S. (2015b). “Influence of waste tyre fibers on strength, abrasion resistance and carbonation of concrete.” Sci. Iranica, 22(4), 1481–1489.
Hamad, B. S., and Abou Haidar, E. Y. (2011). “Effect of steel fibers on bond strength of hooked bars in high-strength concrete.” J. Mater. Civ. Eng., 673–681.
Hannawi, K., Bian, H., Prince-Agbodjan, W., and Raghavan, B. (2016). “Effect of different types of fibers on the microstructure and the mechanical behavior of ultra-high performance fiber-reinforced concretes.” Compos. Part B. Eng., 86, 214–220.
Hemalatha, T., ChandraKisheny, J. M., and Ramaswamy, A. (2013). “Influence of mineral admixtures on fatigue behaviour of self compacting concrete—Scanning electron microscopy and microindentation study.” Proc., 8th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures, Toledo, Spain.
Hesami, S., Hikouei, I. S., and Emadi, S. A. A. (2016). “Mechanical behavior of self-compacting concrete pavements incorporating recycled tire rubber crumb and reinforced with polypropylene fiber.” J. Cleaner Prod., 133, 228–234.
Jiang, C., Fan, K., Wu, F., and Chen, D. (2014). “Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete.” Mater. Des., 58, 187–193.
Khaloo, A. R., Dehestani, M., and Rahmatabadi, P. (2008). “Mechanical properties of concrete containing a high volume of tire rubber particles.” Waste Manage., 28(12), 2472–2482.
Khan, M., and Ali, M. (2016). “Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks.” Constr. Build. Mater., 125, 800–808.
Khatib, Z. K., and Bayomy, F. M. (1999). “Rubberized Portland cement concrete.” J. Mater. Civ. Eng., 206–213.
Li, H., Zhang, M., and Ou, J. (2007). “Flexural fatigue performance of concrete containing nano-particles for pavement.” Int. J. Fatigue, 29(7), 1292–1301.
Li, J., Gang Niu, J., Jun Wan, C., Jin, B., and Liu Yin, Y. (2016). “Investigation on mechanical properties and microstructure of high performance polypropylene fiber reinforced lightweight aggregate concrete.” Constr. Build. Mater., 118, 27–35.
Li, L., Xie, W., and Chen, Z. (2009). “Performance of rubberized high strength concrete after fire.” Proc., 10th Int. Symp. on Structural Engineering for Young Experts: I and II, B. Xu, Y. Xiao, J. Ru, and W. Ren, eds., Science Press, Beijing, 1992–1996.
Liu, F., Chen, G., Li, L., and Guo, Y. (2012). “Study of impact performance of rubber reinforced concrete.” Constr. Build. Mater., 36, 604–616.
Liu, F., Meng, L. Y., Ning, G. F., and Li, L. J. (2015). “Fatigue performance of rubber-modified recycled aggregate concrete (RRAC) for pavement.” Constr. Build. Mater., 95, 207–217.
Liu, F., Zheng, W., Li, L., Feng, W., and Ning, G. (2013). “Mechanical and fatigue performance of rubber concrete.” Constr. Build. Mater., 47, 711–719.
Mastali, M., Dalvand, A., and Sattarifard, A. R. (2016). “The impact resistance and mechanical properties of reinforced self-compacting concrete with recycled glass fibre reinforced polymers.” J. Cleaner Prod., 124, 312–324.
Mohammadi, I., Khabbaz, H., and Vessalas, K. (2014). “In-depth assessment of crumb rubber concrete (CRC) prepared by water-soaking treatment method for rigid pavements.” Constr. Build. Mater., 71, 456–471.
Naito, C., States, J., Jackson, C., and Bewick, B. (2013). “Assessment of crumb rubber concrete for flexural structural members.” J. Mater. Civ. Eng., .
Nehdi, M., and Khan, A. (2001). “Cementitious composites containing recycled tire rubber: An overview of engineering properties and potential applications.” Cem. Concr. Aggregates, 23(1), 3–10.
Ozbay, E., Lachemi, M., and Sevim, U. K. (2011). “Compressive strength, abrasion resistance and energy absorption capacity of rubberized concretes with and without slag.” Mater. Struct., 44(7), 1297–1307.
Rahmani, T., Kiani, B., Shekarchi, M., and Safari, A. (2012). “Statistical and experimental analysis on the behavior of fiber reinforced concretes subjected to drop weight test.” Constr. Build. Mater., 37, 360–369.
Ramanalingam, N., Paramasivam, P., and Mansur, M. A. (2001). “Flexural behaviour of hybrid fibre reinforced cement composites containing high volume fly ash.” Proc., ACI Int. Conf. on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, ACI, Farmington Hills, MI, 147–161.
Rapoport, J., Aldea, C. M., Shah, S. P., Ankenman, B., and Karr, A. (2002). “Permeability of cracked steel fiber-reinforced concrete.” J. Mater. Civ. Eng., 355–358.
Reda Taha, M. M., El-Dieb, A. S., Abd El-Wahab, M. A., and Abdel-Hameed, M. E., (2008). “Mechanical, fracture and microstructural investigations of rubber concrete.” J. Mater. Civ. Eng., 640–649.
Richardson, A. E., Coventry, K. A., and Ward, G. (2012). “Freeze/thaw protection of concrete with optimum rubber crumb content.” J. Cleaner Prod., 23(1), 96–103.
Segre, N., Ostertag, C., and Monteiro, P. J. M. (2006). “Effect of tire rubber particles on crack propagation in cement paste.” Mater. Res., 9(3), 311–320.
Sukontasukkul, P., and Chaikaew, C. (2006). “Properties of concrete pedestrian block mixed with crumb rubber.” Constr. Build. Mater., 20(7), 450–457.
Topcu, I. B. (1995). “The properties of rubberized concrete.” Cem. Conc. Res., 25(2), 304–310.
Topcu, I. B., and Demir, A. (2007). “Durability of rubberized mortar and concrete.” J. Mater. Civ. Eng., 173–178.
Trottier, J. F., and Banthia, N. (1994). “Toughness characterization of steel-fiber reinforced concrete.” J. Mater. Civ. Eng., 264–289.
Turatsinze, A., Bonnet, S., and Granju, J. L. (2005). “Mechanical characterization of cement-based mortar incorporating rubber aggregates from recycled worn tires.” Build. Environ., 40(2), 221–226.
USEPA (U.S. Environmental Protection Agency). (2008). “Scrap tires, common wastes and materials.” ⟨http://www.epa.gov/wastes/conserve/materials/tires/⟩ (Mar. 10, 2014).
Uygunoğlu, T. (2008). “Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete.” Mater. Struct., 41(8), 1441–1449.
Wang, C., Zhang, Y., and Ma, A. (2011). “Investigation into the fatigue damage process of rubberized concrete and plain concrete by AE analysis.” J. Mater. Civ. Eng., 953–960.
Wang, C., Zhang, Y., and Ma, A. (2012). “Fracture process of rubberized concrete by fictitious crack model and AE monitoring.” Comput. Concr., 9(1), 51–61.
Wang, Y., Hao, Y., Hao, H., and Huang, X. (2016). “An efficient method to derive statistical mechanical properties of concrete reinforced with spiral-shaped steel fibres in dynamic tension.” Constr. Build. Mater., 124, 732–745.
Wei, S., Mandel, J. A., and Said, S. (1986). “Study of the interface strength in steel fiber-reinforced cement-based composites.” J. Proc., 83(4), 597–605.
Wong, S. F., and Ting, S. K. (2009). “Use of recycled rubber tires in normal and high-strength concretes.” ACI Mater. J., 106(4), 325–332.
Xiao, F., Zhao, P. W., and Amirkhanian, S. N. (2009). “Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives.” Constr. Build. Mater., 23(10), 3144–3151.
Xie, J. H., Guo, Y. C., Liu, L. S., and Xie, Z. H. (2015). “Compressive and flexural behaviours of a new steel-fibre-reinforced recycled aggregate concrete with crumb rubber.” Constr. Build. Mater., 79, 263–272.
Yan, L., Chouw, N., Huang, L., and Kasal, B. (2016). “Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites.” Constr. Build. Mater., 112, 168–182.
Zhang, Y., Wang, C., and Ma, A. (2010). “Comparison on the fracture behavior of rubberized concrete and plain concrete under bending.” Sci. China Technol. Sci., 53(6), 1526–1533.
Zhang, Y. M., and Zhao, Z. (2015). “Internal stress development and fatigue performance of normal and crumb rubber concrete.” J. Mater. Civ. Eng., .
Zheng, L., Huo, X. S., and Yuan, Y. (2008). “Strength, modulus of elasticity, and brittleness index of rubberized concrete.” J. Mater. Civ. Eng., 692–699.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 29Issue 8August 2017

History

Received: Jul 13, 2016
Accepted: Dec 1, 2016
Published online: Mar 31, 2017
Published in print: Aug 1, 2017
Discussion open until: Aug 31, 2017

Permissions

Request permissions for this article.

Authors

Affiliations

Trilok Gupta, Ph.D.
Assistant Professor, Dept. of Civil Engineering, College of Technology and Engineering, Maharana Pratap Univ. of Agriculture and Technology, Udaipur, Rajasthan 313001, India.
Anshuman Tiwari, S.M.ASCE
Research Scholar, Dept. of Civil Engineering, Malaviya National Institute of Technology Jaipur, Jaipur, Rajasthan 302017, India.
Salman Siddique
Research Scholar, Dept. of Civil Engineering, Malaviya National Institute of Technology Jaipur, Jaipur, Rajasthan 302017, India.
Ravi K. Sharma, Ph.D.
Professor, Dept. of Civil Engineering, College of Technology and Engineering, Maharana Pratap Univ. of Agriculture and Technology, Udaipur, Rajasthan 313001, India.
Sandeep Chaudhary, Ph.D. [email protected]
Associate Professor, Dept. of Civil Engineering, Malaviya National Institute of Technology Jaipur, Jaipur, Rajasthan 302017, India (corresponding author). E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share