Chapter 23
Recycling for Mitigating Climate Change
Publication: Climate Change Modeling, Mitigation, and Adaptation
Get full access to this article
View all available purchase options and get full access to this chapter.
23.7 References
Astrup, T., Møller, J., and Fruergaard, T. (2009). “Incineration and co-combustion of waste: accounting of greenhouse gases and global warming contributions”. Waste Manage. Res., 27(8), 789–799.
Bärring, L. (1993). “Climate - change or variation?” Climatic Change, 25, 1–13.
Berneche-Perez, G., Salvadro S.C., María G. A., Artruro D. V and Elena S. S. M. (2001). “Solid waste characterisation studies in the Guadalajara metropolitan zone, Mexico.” Waste Manage. Res. 19(5), 413–424.
Bogner, J., and Matthews, E. (2003). “Global methane emission from landfills: new methodology and annual estimates 1980–1996.” Global Biogeochem Cycles, 17(2), 1065–1083.
Bogner, J., Pipatti, R., Hashimoto, S., Diaz, C., Mareckova, K., Diaz, L., Kjeldsen, P., Monni. S, Faaij, A, Gao, X, Zhang, T, Ahmed, M.A, Sutamihardja, R. T. M, and Gregory, R. (2008). “Mitigation of global greenhouse gas emissions from waste. conclusions and strategies from the Intergovernmental Panel on Climate Change (IPCC) Fourth Assessment Report. Working Group III (Mitigation).” Waste Manag. Res., 26(1), 11–32.
Brandrup, J. (1995). “Preparation of feedstock for petrochemical recycling–requirements imposed on plastics waste”. In: Recycling and Recovery of Plastics. Hanser Publishers, Munich; Vienna; New York, 393–412.
California Department of Conservation (2008). Recycle. Available at http://www.wastemanagementsd.com/env/recycle (accessed June 2011).
Colarado university report. Recycling facts. Available at http://ecenter.colorado.edu/recycling/education-a-outreach/recycling-facts (Aceesed on June 2011).
Delgado, C., Barruetabeña, L., Salas, O., and Wolf, O. (2007). Assessment of the Environmental Advantages and Drawbacks of Existing and Emerging Polymers Recovery Processes. Institute for Prospective Technological Studies, Joint Research Centre, European Commission.
EC and NRC (2005). Determination of the Impact of Waste Management Activities on Greenhouse Gas Emissions: 2005. Update Final Report. Environment Canada and Natural Resources Canada.
Frees, N. (2002). Miljømæssige fordele og ulemper ved genvinding af plast (Environmental advantages and disadvantages of plastic recycling, in Danish). Danish Environmental Protection Agency, Copenhagen, Denmark.
Fruergaard, T., Ekvall, T., and Astrup, T. (2009). “Energy use and recovery in waste management and implications for accounting of greenhouse gases and global warming contributions.” Waste Manage Res, 27, 724–737.
IPCC (2007). Climate Change 2007: The Physical Science Basis. Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change. Solomon, S., Qin D., Manning M., Chen Z., Marquis M., Averyt K. B., Tignor M., and Miller H. L. (eds.). Cambridge University Press, Cambridge
Kaseva, M. E., Mbuligwe, S. E., and Kasenga, G. (2002). “Recycling inorganic domestic solid wastes: results from a pilot study in Dares Salaam City, Tanzania.” Resour.Conserv. Recycl, 35(4), 243–257.
Kline D., Hargrove, T., and Vanderlan, C. (1998). Treatment of Biomass Fuels in Carbon Emissions Trading Systems. Center for Clean Air Policy’s Greenhouse Gas Emissions Trading, Braintrust, Washington.
Korhonen, M., and Dahlbo (2007). Reducing Greenhouse Gas Emissions by Recycling Plastics and Textiles into Products. Finnish Environment Institute Research Department, Finland.
Lowe, J. (1981). Energy Usage and Potential Savings in the Woollen Industry. Wool Industry Research Association, Leeds, UK.
Mann, M. K., and Spath, P. L. (1997). Life Cycle Assessment of a Biomass Gasification Combined-Cycle Power System. National Renewable Energy Laboratory, Golden, CO.
McDougall, F., White, P., Franke, M., and Hindle, P. (2001). Integrated Solid Waste Management: a Life Cycle Inventory, 2nd Ed. Blackwell Science Ltd, UK.
Mitchell, J. M. Jr., Dzerdzeevskii, B., Flohn, H., Hofmeyr, W. L., Lamb, H. H., Rao, K. N., and Wallén, C. C. (1966). “Climatic Change. WMO Technical Note No 79.” World Meteorological Organization, Geneva.
Mitchell, T., and Tanner, T. M. (2007). “Embedding Climate Change Adaptation in Development Processes. In Focus: Issue 02.” Institute of Development Studies, University of Sussex, UK.
Molina, M., Zaelke, D., Sarmac, K. M., Andersen, S. O., Ramanathane, V., and Kaniaruf, D. (2009). “Tipping elements in earth systems special feature: Reducing abrupt climate change risk using the Montreal Protocol and other regulatory actions to complement cuts in CO2 emissions.” Procee. Nat. Academy of Sci, 106(49), 20616–20621.
Ngoc, U. N., and Schnitzer, H. (2009). “Sustainable solutions for solid waste management in Southeast Asian countries.” Waste Manag., 29(6), 1982–1995.
Ogilvie, S. M. (1992). A Review of the Environmental Impact of Recycling. Report LR 911 (MR) Warren Spring Laboratories, Stevenage, UK.
Pielke, R. Jr. (2004). “What is climate change?” Issues in Science and Technology 20(4), 31–34.
Pimenteira, C. A. P., Pereira, A. S., Oliveira, L. B., Rosa, L. P., Reis, M. M., and Henriques, R. M. (2004). “Energy conservation and CO2 emission reductions due to recycling in Brazil.” Waste Management, 24(9), 889–897.
Saha. R. (2006). “Genanvendelse i LCA – systemudvidelse (Recycling in LCA – system expansion, in Danish), Miljønyt Nr. 81.” Danish Environmental Protection Agency, Copenhagen, Denmark.
Shonfield, P. (2008). LCA of Management Options for Mixed Waste Plastics. Final report. The Waste and Resources Action Programme (WRAP), Banbury, Oxon, UK.
Smith, A., Brown, K., Ogilvie, S., Rushton, K., and Bates, J. (2001). Waste Management Options and Climate Change. DG Environment, AEA Technology, European Commission.
Thorneloe, S., Weitz, K., and Jambeck, J. (2005). “Moving from solid waste disposal to materials management in the United States.” In: Proc. Of the Sardinia ‘05, International Solid and Hazardous Waste Symposium. CISA, University of Cagliari, Sardinia.
Tuhkanen, S., Pipatti, R., Sipilä, K., and Mäkinen, T. (2001). “The effect of new solid waste treatment systems on greenhouse gas emissions.” Fifth International Conference on Greenhouse Gas Control Technologies (GHGT-5), CSIRO Publishing, Collingwood, 1236–1241.
USEPA (1999). National Source Reduction Characterization Report for Municipal Solid Waste in the United States. EPA 530R-99-034, Office of Solid Waste and Emergency Response, Washington, DC.
USEPA (2003). International Analysis of Methane and Nitrous Oxide Abatement Opportunities. Report to Energy Modeling Forum, Working Group 21. US Environmental Protection Agency, Washington, DC.
USEPA (2005). Municipal Solid Waste Generation, Recycling and Disposal in the United States: Facts and Figures for 2003. US Environmental Protection Agency, Washington, DC.
Weitz, K., Thorneloe, S., Nishtala, S., Yarkosky, S., and Zannes, M. (2002). “The impact of municipal solid waste management on greenhouse gas emissions in the United States.” J. Air. Waste Manag. Assoc., 52, 1000–1011.
Woolridge, A. C., Ward, G. D, Phillips, P. S. Collins, M., and Gandy, S. (2006). “Life cycle assessment for reuse/recycling of donated waste textiles compared to use of virgin material: An UK energy saving perspective.” Resour. Conserv. Recycl, 46, 94–103.
WRAP (2006). Environmental benefits of recycling, an international review of life cycle comparisons for key materials in the UK recycling sector. Waste and Resources Action Program, WRAP, Banbury, Oxfordshire, UK.
Information & Authors
Information
Published In
Climate Change Modeling, Mitigation, and Adaptation
Pages: 621 - 638
Copyright
© 2013 American Society of Civil Engineers.
History
Published online: May 31, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.