Assessing Compatibility of Natural Gas Pipeline Materials with Hydrogen, , and Ammonia
Publication: Journal of Pipeline Systems Engineering and Practice
Volume 14, Issue 2
Abstract
In this study, we examine the efficacy of repurposing natural gas (NG) pipelines for transporting hydrogen blends (with NG), ammonia, and (gaseous and supercritical) from the standpoint of materials compatibility. Some information pertaining to component performance is also included, especially those components critical for pressurization and monitoring of flow. A listing of critical pipeline components and materials was developed, and their compatibilities was assessed for each fluid or gas type based on known compatibilities. Results indicate that pipeline materials should be suitable for gaseous and anhydrous ammonia, but hydrogen blends greater than 12% may be problematic. Current compressor/regulator stations will not be suitable for use with either supercritical or ammonia. Important knowledge gaps were identified, including (1) polymer performance with hydrogen/NG blends at low pressures, (2) compressor/regulator station polymers and epoxy coating materials with supercritical , and (3) metal performances of hydrogen/NG blends at low pressures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors gratefully acknowledge the support and guidance from Evan Frye and Tim Reinhardt of the DOE Office of Fossil Energy and Carbon Management. We also received valuable contributions and insight from Kevin Nishimura of Hawai’i Gas, Adway De and Will Nissen from the Minnesota Department of Commerce, John Heer and Casey Tollefson of CenterPoint Energy, Darral Ward of Boardwalk Pipelines, and Mark Lower of Oak Ridge National Laboratory. The authors would also like to acknowledge the helpful comments and guidance provided by two anonymous reviewers which greatly improved the quality of the manuscript.
Disclaimer
This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the US Department of Energy. The United States Government and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-plan).
References
Abe, J. O., A. P. I. Popoola, E. Ajenifuja, and O. M. Popoola. 2019. “Hydrogen energy, economy and storage: Review and recommendation.” Int. J. Hydrogen Energy 44 (29): 15072–15086. https://doi.org/10.1016/j.ijhydene.2019.04.068.
AGA (American Gas Association). 2022. “Natural gas delivery system materials.” Accessed June 14, 2021. https://www.aga.org/natural-gas/delivery/natural-gas-delivery-system-materials-/.
Amaro, R. L., N. Rustagi, K. O. Findley, E. S. Drexler, and A. J. Slifka. 2014. “Modeling the fatigue crack growth of X100 pipeline steel in gaseous hydrogen.” Int. J. Fatigue 59 (Feb): 262–271. https://doi.org/10.1016/j.ijfatigue.2013.08.010.
An, T., S. Zheng, H. Peng, X. Wen, L. Chen, and L. Zhang. 2017. “Synergistic action of hydrogen and stress concentration on the fatigue properties of X80 pipeline steel.” Mater. Sci. Eng., A 700 (Jul): 321–330. https://doi.org/10.1016/j.msea.2017.06.029.
Ansaloni, L., B. Alcock, and T. A. Peters. 2020. “Effects of on polymeric materials in the transport chain: A review.” Int. J. Greenhouse Gas Control 94 (Mar): 102930. https://doi.org/10.1016/j.ijggc.2019.102930.
API (American Petroleum Institute). 2020. Line pipe: 5L pipe specification. 46th ed. Washington, DC: API.
ASME. 2019. Hydrogen piping and pipelines. ASME B31.12-201. New York: ASME.
Aursand, E., C. Dorum, M. Hammer, A. Morin, S. T. Munkejord, and H. O. Nordhagen. 2014. “ pipeline integrity: Comparison of a coupled fluid-structure model and uncoupled two-curves methods.” Energy Procedia 51 (Jan): 382–391. https://doi.org/10.1016/j.egypro.2014.07.045.
Aziz, M., A. T. Wijayanta, and A. B. D. Nandiyanto. 2020. “Ammonia as effective hydrogen storage: A review on production, storge and utilization.” Energies 13 (12): 3062. https://doi.org/10.3390/en13123062.
Baek, U. B., S. H. Nahm, H. M. Lee, and Y. H. Lee. 2014. “Mechanical properties of X70 steel in gaseous hydrogen.” In Proc., Int. Hydrogen Conf. (IHC 2012): Hydrogen-Materials Interactions, edited by B. P. Somerday and P. Sofronis. New York: ASME.
Barrie, J., K. Brown, P. R. Hatcher, and H. U. Schellhase. 2005. “Carbon dioxide pipelines: A preliminary review of design and risks.” Greenhouse Gas Control Technol. 1 (Jan): 315–320. https://doi.org/10.1016/B978-008044704-9/50032-X.
Bjorck, P., and M. Grahn. 1999. A feasibility study of hydrogen distribution in present natural gas pipeline systems. Gothenburg, Sweden: Göteborg Univ./Chalmers Univ. of Technology.
Blackburn, P. 2022. “Risks of converting natural gas pipelines to service.” Pipeline Fighters HUB. Accessed July 8, 2022. https://pipelinefighters.org/news/risks-of-converting-natural-gas-pipelines-to-co2-service.
Briottet, L., R. Batisse, G. deDinechin, P. Langlois, and L. Thiers. 2012. “Recommendations on X80 steel for the design of hydrogen gas transmission pipelines.” Int. J. Hydrogen Energy 37 (11): 9423–9430. https://doi.org/10.1016/j.ijhydene.2012.02.009.
Brown, A., A. Eickhoff, J. E. A. Reinders, I. Raben, M. Spruijt, and F. Neele. 2017. “IMPACTS: Framework for risk assessment of transport and storage infrastructure.” Energy Procedia 114 (Jul): 6501–6513. https://doi.org/10.1016/j.egypro.2017.03.1786.
Buit, L., M. Ahmad, W. Mallon, and F. Hage. 2011. “ EuroPipe study of the occurrence of free water in dense phase transport.” Energy Procedia 4 (Jan): 3056–3062. https://doi.org/10.1016/j.egypro.2011.02.217.
Cardoso, J. S., V. Silva, R. C. Rocha, M. J. Hall, M. Costa, and D. Eusebio. 2021. “Ammonia as an energy vector: Current and future prospects for low-carbon fuel applications in internal combustion engines.” J. Cleaner Prod. 296 (May): 126562. https://doi.org/10.1016/j.jclepro.2021.126562.
Castagnet, S., J. C. Grandidier, M. Comyn, and G. Benoit. 2012. “Effect of long-term hydrogen exposure on the mechanical properties of polymers used for pipes and tested in pressurized hydrogen.” Int. J. Press. Vessels Pip. 89 (Jan): 203–209. https://doi.org/10.1016/j.ijpvp.2011.11.008.
Cerniauskas, S., A. J. C. Junco, T. Grube, M. Robinius, and D. Stolten. 2020. “Options of natural gas pipeline reassignment for hydrogen: Cost assessment for a Germany case study.” Int. J. Hydrogen Energy 45 (21): 12095. https://doi.org/10.1016/j.ijhydene.2020.02.121.
Choi, Y. S., S. Hassani, T. N. Vu, S. Nesic, A. Z. B. Abas, A. M. Nor, and M. F. Suhor. 2017. “Corrosion inhibition of pipeline steels under supercritical environment.” In Proc., NACE Int. CORROSION 2017 Conf. & Expo. Houston, TX: National Association of Corrosion Engineers.
Clees, T., A. Baddin, B. Klaassen, L. Nikitina, and I. Nikitin. 2021. “Efficient method for simulation of long-distance gas transport networks with large amounts of hydrogen injection.” Energy Convers. Manage. 234 (Apr): 113984. https://doi.org/10.1016/j.enconman.2021.113984.
Colahan, M., Y.-S. Choi, and S. Nesic. 2021. “Effect of flow on the corrosion behavior of pipeline steels under supercritical environments with impurities.” In Proc., CORROSION 2021. Houston, TX: National Association of Corrosion Engineers.
Collet, P., and B. Chizat. 2015. “The proven efficiency of epoxy coats for the protection of gas transmission pipelines.” In Proc., of the Pipeline Technology Conf. 2015. Hanover, Germany: Euro Institute for Information and Technology.
Craig, B. D. 1990. Handbook of corrosion data. Metals Park, OH: ASM International.
Davies, M. 2006. “Corrosion by Ammonia.” In ASM handbook, Volume 13C corrosion: Environments and industries, edited by S. Cramer and B. S. Covino. Metals Park, OH: ASM International.
Dear, F. F., and G. C. G. Skinner. 2017. “Mechanisms of hydrogen embrittlement in steels: Discussion.” Philos. Trans. R. Soc. London, Ser. A 375 (2098): 20170032. https://doi.org/10.1098/rsta.2017.0032.
DeVries, H., O. Florisson, and G. C. Tiekstra. 2007. “Safe operation of natural gas appliances fueled with hydrogen/natural gas mixtures (Progress obtained in the NaturalHy-project).” In Proc., 2nd Int. Conf. on Hydrogen Safety. Brussels, Belgium: International Association of Hydrogen Safety.
DeVries, H., A. V. Mokhov, and H. B. Levinsky. 2017. “The impact of natural gas/hydrogen mixtures on the performance of end-use equipment: Interchangeability analysis for domestic appliances.” Appl. Energy 208 (Dec): 1007–1019. https://doi.org/10.1016/j.apenergy.2017.09.049.
Dickinson, R. R., D. L. Battye, V. M. Litton, P. J. Ashman, and G. J. Nathan. 2010. “Alternative carriers for remote renewable energy sources using existing CNG infrastructure.” Int. J. Hydrogen Energy 35 (3): 1321–1329. https://doi.org/10.1016/j.ijhydene.2009.11.052.
Dodds, P. E., and S. Demoullin. 2013. “Conversion of the UK gas system to transport hydrogen.” Int. J. Hydrogen Energy 38 (18): 7189–7200. https://doi.org/10.1016/j.ijhydene.2013.03.070.
Drexler, E., A. Slifka, R. Amaro, and D. Lauria. 2017. “Fatigue crack growth rates of API X70 pipeline steels in pressurized hydrogen gas compared with an X52 pipeline in hydrogen service.” In Proc., Int. Hydrogen Conf. (IHC 2016): Materials Performance in Hydrogen Environments, edited by B. P. Somerday and P. Sofronis, New York: ASME Press.
Dugstad, A., M. Halseid, B. Morland, and A. O. Sivertsen. 2013. “Dense phase corrosion and the impact of depressurization and accumulation of impurities.” In Proc., NACE Int. CORROSION 2013 Conf. & Expo. Houston, TX: National Association of Corrosion Engineers.
Dugstad, A., B. Morland, and S. Clausen. 2011. “Corrosion of transport pipelines for —Effect of water ingress.” Energy Procedia 4 (Jan): 3063–3070. https://doi.org/10.1016/j.egypro.2011.02.218.
Engineering ToolBox. 2008. “Solubility of gases in water vs. temperature.” Accessed November 14, 2022. https://www.engineeringtoolbox.com/gases-solubility-water-d_1148.html.
Ez-Zaki, H., F. Christien, C. Bosch, M. Bertin, and L. Briottet. 2020. “Effect of hydrogen content in natural gas blend on the mechanical properties of a L485-MB low-alloyed steel.” In Proc., of the ASME 2020 Pressure Vessels & Piping Conf. New York: ASME.
Fassina, P., M. F. Brunella, L. Lazzari, G. Re, L. Vergani, and A. Sciuccati. 2013. “Effect of hydrogen and low temperature on fatigue crack growth of pipeline steels.” Eng. Fract. Mech. 103 (May): 10–25. https://doi.org/10.1016/j.engfracmech.2012.09.023.
Fekete, J. R., J. W. Sowards, and R. L. Amaro. 2015. “Economic impact of applying high strength steels in hydrogen gas pipelines.” Int. J. Hydrogen Energy 40 (33): 10547–10558. https://doi.org/10.1016/j.ijhydene.2015.06.090.
Florisson, O. 2014. “A step towards the hydrogen economy by using the existing natural gas grid (the NATURALHY-project).” In Proc., DOE Hydrogen Pipeline R&D Project Review Meeting held January 5-6, 2005. Washington, DC: DOE.
Glass, J. 2019. pipelines—New technologies & economics for carbon capture/sequestration. Houston, TX: Kinder Morgan.
Goodhand, J., T. McMahan, A. Chandra, and B. Amend. 2021. “Determining the feasibility of pipeline transportation of hydrogen and hydrogen-natural gas blends.” DNV Webinar, May 11, 2021.
Gu, Y., and W. S. Epling. 2019. “Passive NOx absorbers: An overview of catalyst performance and reaction chemistry.” Appl. Catal., A 570 (Jan): 1–14. https://doi.org/10.1016/j.apcata.2018.10.036.
Haeseldonckx, D., and W. D’Haeseleer. 2007. “The use of natural-gas pipeline infrastructure for hydrogen transport in a changing market structure.” Int. J. Hydrogen Energy 32 (10–11): 1381–1386. https://doi.org/10.1016/j.ijhydene.2006.10.018.
Hawai’iGas. 2022. “Decarbonization and energy innovation.” Accessed July 6, 2022. https://www.hawaiigas.com/clean-energy/decarbonization.
HYBLEND. 2021. “Hyblend-tech-summary.” Accessed July 7, 2021. https://www.energy.gov/sites/default/files/2021-08/hyblend-tech-summary.pdf.
Ishimoto, Y., P. Voldsund, S. Roussanaly, D. Berstad, and S. O. Gardardottir. 2020. “Large-scale production and transport of hydrogen from Norway to Europe and Japan: Value chain analysis and comparison of liquid hydrogen and ammonia as energy carriers.” Int. J. Hydrogen Energy 45 (58): 32865–32883. https://doi.org/10.1016/j.ijhydene.2020.09.017.
Jaffe, A. M., et al. 2017. The potential to build current natural gas infrastructure to accommodate the future conversion to near-zero transportation technology. Davis, CA: Univ. of California–Davis Institute of Transportation Studies.
Lee, J. A. 2016. Hydrogen embrittlement. Huntsville, AL: National Aeronautics and Space Administration, Marshall Space Flight Center.
MacFarlane, D. R., P. V. Cherepanov, J. Choi, B. H. R. Suryanto, R. Y. Hodgetts, J. M. Bakker, F. M. Ferro Vallana, and A. N. Simonov. 2020. “A roadmap to the ammonia economy.” Joule 4 (6): 1186–1205. https://doi.org/10.1016/j.joule.2020.04.004.
MDA (Minnesota Department of Agriculture). 2022. “Factsheet: Anhydrous ammonia system piping requirements.” Accessed March 3, 2022. https://www.mda.state.mn.us/sites/default/files/inline-files/Anhydrous%20Ammonia%20System%20Piping%20Requirements.pdf.
Melaina, M. W., O. Antonia, and M. Penev. 2013. Blending hydrogen into natural gas pipeline networks: A review of key issues. Golden, CO: National Renewable Energy Laboratory.
Meng, B., C. Gu, L. Zhang, C. Zhou, X. Li, Y. Zhao, J. Zheng, X. Chen, and Y. Han. 2017. “Hydrogen effects on X80 pipeline steel in high-pressure natural gas/hydrogen mixtures.” Int. J. Hydrogen Energy 42 (11): 7404–7412. https://doi.org/10.1016/j.ijhydene.2016.05.145.
Menon, N., W. Walker, M. Anderson, and N. Colgan. 2019. Compatibility of polymers in super-critical carbon dioxide for power generation systems: High level findings for low temperatures and pressure conditions. Sandia, NM: Sandia National Laboratory.
Michler, T., C. Elsasser, K. Wackermann, and F. Schweizer. 2021. “Effect of hydrogen in mixed gases on the mechanical properties of steels-theoretical background and review of test results.” Metals 11 (11): 1847. https://doi.org/10.3390/met11111847.
Morland, B. H., and A. Dugstad. 2016. “Corrosion of carbon steel in water equilibrated with liquid and supercritical CO2.” In Proc., NACE Int. CORROSION 2016 Conf. & Expo. Houston, TX: National Association of Corrosion Engineers.
Morland, B. H., T. Norby, M. Tjelta, and G. Svenningsen. 2019. “Effect of , , , and concentrations on chemical reactions and corrosion of carbon steel in dense phase .” Corrosion 75 (11): 1327–1338. https://doi.org/10.5006/3111.
Morland, B. H., and G. Svenningsen. 2021. “Pitfalls and artefacts in corrosion experiments with dense phase .” In Proc., CORROSION 2021. Houston, TX: National Association of Corrosion Engineers.
Nguyen, T. T., J. S. Park, W. S. Kim, S. H. Nahm, and U. B. Baek. 2020a. “Environment hydrogen embrittlement of pipeline steel X70 under various gas mixture conditions with in situ small punch tests.” Mater. Sci. Eng. A 781 (Apr): 139114. https://doi.org/10.1016/j.msea.2020.139114.
Nguyen, T. T., J. S. Park, S. H. Nahm, and U. B. Beak. 2021. “Evaluation of hydrogen related degradation of API X42 pipeline under hydrogen/natural gas mixture conditions using small punch test.” Theor. Appl. Fract. Mech. 113 (Jun): 102961. https://doi.org/10.1016/j.tafmec.2021.102961.
Nguyen, T. T., N. Tak, J. Park, S. H. Nahm, and U. B. Baek. 2020b. “Hydrogen embrittlement susceptibility of X70 pipeline steel weld under a low partial hydrogen environment.” Int. J. Hydrogen Energy 45 (43): 23739–23753. https://doi.org/10.1016/j.ijhydene.2020.06.199.
Nyukyforchyn, H., E. Lunarska, O. T. Tsyrulnyk, K. Nikiforov, M. E. Genarro, and G. Gabetta. 2010. “Environmentally assisted ‘in-bulk’ steel degradation of long term service gas trunkline.” Eng. Fail. Anal. 17 (3): 624–632. https://doi.org/10.1016/j.engfailanal.2009.04.007.
Obara, S., and J. Li. 2020. “Evaluation of the introduction of a hydrogen supply chain using a conventional gas pipeline—A case study of the Qinghai–Shanghai hydrogen supply chain.” Int. J. Hydrogen Energy 45 (58): 33846–33859. https://doi.org/10.1016/j.ijhydene.2020.09.009.
Ogawa, Y., H. Matsunaga, J. Yamabe, S. Yoshikawa, and S. Matsuoka. 2017. “Unified evaluation of hydrogen-induced crack growth in fatigue tests and fracture toughness tests of a carbon steel.” Int. J. Fatigue 103 (Oct): 223–233. https://doi.org/10.1016/j.ijfatigue.2017.06.006.
Ogawa, Y., H. Matsunaga, J. Yamabe, S. Yoshikawa, and S. Matsuoka. 2018. “Fatigue limit of carbon and Cr-Mo steels as a small fatigue crack threshold in high-pressure hydrogen gas.” Int. J. Hydrogen Energy 43 (43): 20133–20142. https://doi.org/10.1016/j.ijhydene.2018.09.026.
Okezue, C., and D. Kuvshinov. 2017. “Effect of chemical impurities on centrifugal machine performance: Implications for compressor sizing in a transport pipeline.” Energy Procedia 142 (Dec): 3675–3682. https://doi.org/10.1016/j.egypro.2017.12.261.
Pan, B. W., J. X. Li, T. J. Su, W. Y. Chu, and L. J. Qiao. 2012. “Role of hydrogen in stress corrosion cracking of X-60 pipeline steel in soil containing water.” Corrosion 68 (11): 1029–1036. https://doi.org/10.5006/0559.
Paul, S. 2017. “Performance of thermally sprayed corrosion resistant alloy (CRA) coating in 50 MPa supercritical CO2.” In Proc., NACE Int. CORROSION 2017 Conf. & Expo. Houston, TX: National Association of Corrosion Engineers.
Pellegrini, M., A. Guzzini, and C. Saccani. 2020. “A preliminary assessment of the potential of low percentage green hydrogen blending in the Italian natural gas network.” Energies 13 (21): 5570. https://doi.org/10.3390/en13215570.
Pluvinage, G., J. Capelle, and M. Hadj Meliani. 2019. “Pipe networks transporting hydrogen pure or blended with natural gas, design and maintenance.” Eng. Fail. Anal. 106 (Dec): 104164. https://doi.org/10.1016/j.engfailanal.2019.104164.
Raben, I., M. Spruijt, and F. Neele. 2017. “IMPACTS: Framework for risk assessment of transport and storage infrastructure.” Energy Procedia 114 (Jul): 6501–6513. https://doi.org/10.1016/j.egypro.2017.03.1786.
Ronevich, J. A., E. J. Song, Z. Feng, Y. Wang, C. D’Elia, and M. R. Hill. 2020. “Fatigue crack growth rates in high pressure hydrogen gas for multiple X100 pipeline welds accounting for crack location and residual stress.” Eng. Fract. Mech. 228 (Apr): 106846. https://doi.org/10.1016/j.engfracmech.2019.106846.
Rosli, N. R., S. Nesic, Y. S. Choi, and D. Young. 2016. “Corrosion of UNS G10180 steel in supercritical and subcritical with as a contaminant.” In Proc., NACE Int. CORROSION 2016 Conf. & Expo. Houston, TX: National Association of Corrosion Engineers.
San Marchi, C., and J. Ronevich. 2021. “Hydrogen assisted fatigue and fracture of pressure vessels and line pipe steels.” In Proc., Materials Challenges in Assessment of Fitness for Service in EPRI Virtual Workshop for ASME 2021 PVP Conf. New York: ASME.
Sarzosa, D. F. B., R. Savioli, C. Ruggieri, and A. G. Garmbis. 2020. “Comparison of fracture toughness curves obtained by single and multi-specimen methodologies for a pipe having an undermatched girth weld.” In Proc., ASME 2020 Pressure Vessels & Piping Conf. New York: ASME.
Schmura, E., M. Klingenberg, M. Paster, and J. Gruber. 2005. Existing natural gas pipeline materials and associated operational characteristics. Washington DC: DOE.
Schweitzer, P. A. 1986. Corrosion resistance tables, metals, plastics, nonmetals and rubbers. 2nd ed. New York: Marcel Dekker.
Simmons, K. L., L. Fring, W. Kuang, Y. Shin, R. Shrestha, and C. San Marchi. 2021a. “Morphological changes and their effects on material properties in natural gas medium density polyethylene pipe in low pressure hydrogen.” In Proc., Hydrogen Compatibility of Materials III, MRS Fall 2021 Meeting. Warrendale, PA: Materials Research Society.
Simmons, K. L., W. Kuang, S. D. Burton, B. W. Arey, Y. Shin, N. C. Menon, and D. B. Smith. 2021b. “H-Mat hydrogen compatibility of polymers and elastomers.” Int. J. Hydrogen Energy 46 (23): 12300–12310. https://doi.org/10.1016/j.ijhydene.2020.06.218.
Skaugen, G., S. Rouissanaly, J. Jakobsen, and A. Brunsvold. 2016. “Techno-economic evaluation of the effects of impurities on conditioning and transport of by pipeline.” Int. J. Greenhouse Gas Control 54 (Nov): 627–639. https://doi.org/10.1016/j.ijggc.2016.07.025.
Stalheim, D., S. Jansto, T. Boggess, S. Ningileri, and D. Bromley. 2014. “Microstructure and mechanical property performance evaluation of commercial grade API pipeline steels in high pressure gaseous hydrogen.” In Proc., Int. Hydrogen Conf. (IHC 2012): Hydrogen-Materials Interactions, edited by B. P. Somerday and P. Sofronis. New York: ASME.
Tzimas, E., P. Castello, and S. Peteves. 2007. “The evolution of size and cost of a hydrogen delivery infrastructure in Europe in the medium and long term.” Int. J. Hydrogen Energy 32 (10–11): 1369–1380. https://doi.org/10.1016/j.ijhydene.2006.10.017.
USEIA (United States Energy Information Administration). 2022. “United States department of energy.” Accessed August 22, 2022. https://www.eia.gov/energyexplained/natural-gas/natural-gas-pipelines.php.
Wallace, W., L. Goudrzi, K. Callahan, and R. Wallace. 2015. A review of the pipeline infrastructure in the US. Morgantown, WV: National Energy Technology Laboratory.
Wan, Z., Y. Tao, J. Shao, Y. Zhang, and H. You. 2021. “Ammonia as an effective hydrogen carrier and a clean fuel for solid oxide fuel cells.” Energy Convers. Manage. 228 (Jan): 113729. https://doi.org/10.1016/j.enconman.2020.113729.
Wang, J., D. Ryan, E. J. Anthony, T. Wildgust, and T. Aiken. 2011. “Effects of impurities on transport, injection and storage.” Energy Procedia 4 (Jan): 3071–3078. https://doi.org/10.1016/j.egypro.2011.02.219.
Wetenhall, B., H. Aghajani, H. Chalmers, S. D. Benson, M. C. Ferrari, J. Li, J. M. Race, P. Singh, and J. Davison. 2014. “Impact of impurity on compression, liquefaction and transportation.” Energy Procedia 63 (Jan): 2764–2778. https://doi.org/10.1016/j.egypro.2014.11.299.
Wilson, J. 2021. “Pipelines may have new life moving carbon dioxide.” Accessed July 8, 2022. https://jpt.spe.org/pipelines-may-find-new-life-moving-carbon-dioxide.
Witkowski, A., A. Rusin, S. Majkut, S. Rulik, and K. Stolecka. 2013. “Comprehensive analysis of pipeline transportation systems for sequestration. Thermodynamics and safety problems.” Energy Convers. Manage. 76 (Dec): 665–673. https://doi.org/10.1016/j.enconman.2013.07.087.
Yamabe, J., and S. Nishimura. 2009. “Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas.” Int. J. Hydrogen Energy 34 (4): 1977–1989. https://doi.org/10.1016/j.ijhydene.2008.11.105.
Zeng, Y., M. Arafin, C. Shi, and R. Zavadil. 2016. “Influence of impurity hydrogen sulfide on the corrosion performance of pipeline steels in supercritical carbon dioxide stream.” In Proc., NACE Int. CORROSION 2016 Conf. & Expo. Houston, TX: National Association of Corrosion Engineers.
Zhai, J. M., B. N. Shou, X. Wang, T. Xu, G. Q. Ma, and L. L. Gui. 2016. “A hydrogen compatibility and suitability evaluation of the seamless steel tube 4130X.” In Proc., of the ASME 2016 Pressure Vessels and Piping Conf. New York: ASME.
Zhang, N. Y., W. T. Zhao, L. Liu, and T. Shi. 2018. “Corrosion evaluation of tubing steels and material selection in the coexistent environment.” In Proc., NACE Int. CORROSION 2018 Conf. & Expo. Houston, TX: National Association of Corrosion Engineers.
Information & Authors
Information
Published In
Journal of Pipeline Systems Engineering and Practice
Volume 14 • Issue 2 • May 2023
Copyright
© 2023 Published by American Society of Civil Engineers.
History
Received: Sep 1, 2022
Accepted: Dec 16, 2022
Published online: Feb 7, 2023
Published in print: May 1, 2023
Discussion open until: Jul 7, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Rongbin Li, Yuping Zhang, Qiyu Huang, Bin Tao, Xianbin Huang, Xiaorui Guan, Liangliang Li, Longjun Cheng, Investigation of Wax-Deposit Thickness in Oil and Water Emulsions: Facing the Development Trend of Intelligent Pipeline Operation, Journal of Pipeline Systems Engineering and Practice, 10.1061/JPSEA2.PSENG-1551, 15, 2, (2024).
- Anne H. Menefee, Brandon A. Schwartz, Comparing green hydrogen and green ammonia as energy carriers in utility-scale transport and subsurface storage, Energy and Climate Change, 10.1016/j.egycc.2024.100163, 5, (100163), (2024).
- Yuecheng Zhang, Sandra Kentish, Colin A. Scholes, Reducing ammonia permeance in poly(acrylonitrile‐co‐butadiene) ( NBR )‐based elastomers , Journal of Applied Polymer Science, 10.1002/app.54566, 140, 42, (2023).