Experimental Evaluation of a Rocking Damage-Free Steel Column Base with Friction Devices
Publication: Journal of Structural Engineering
Volume 146, Issue 10
Abstract
This paper presents the experimental evaluation of an earthquake-resilient rocking damage-free steel column base, previously proposed and numerically investigated by the authors. The column base uses post-tensioned high-strength steel bars to control its rocking behavior, and friction devices to dissipate seismic energy. It is equipped with a circular steel plate with rounded edges, which is used as a rocking base. The rounded edges prevent stress concentration and damage of the contact surfaces, whereas the circular shape allows rocking toward all plan directions. In contrast to conventional steel column bases, the proposed column base exhibits monotonic and cyclic moment–rotation behaviors that are easily described by analytical equations. This allows the definition of a step-by-step design procedure which ensures damage-free behavior, self-centering capability, and energy dissipation capacity for a target design base rotation. The experimental tests, presented in this study, were conducted under monotonic and cyclic loads demonstrating the damage-free behavior even under large rotations. The experimental results were used to validate the design procedure and to calibrate refined three-dimensional (3D) nonlinear finite-element models that will allow further investigations.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
This research is supported by Marie Sklodowska-Curie Action Fellowships within the H2020 European Programme. Any opinions, findings, and conclusions or recommendations expressed in this paper are those of the authors and do not necessarily reflect the views of the European Commission. The authors also gratefully acknowledge the support of Prof. J. Toby Mottram and the work of the technicians of the Structural Testing Laboratory of the University of Warwick: Taylor Arnett and Neil Gillespie.
References
AISC. 2005. Seismic provisions for structural steel buildings. ANSI/AISC 341-05. Chicago: AISC.
Akcelyan, S., D. G. Lignos, T. Hikino, and M. Nakashima. 2016. “Evaluation of simplified and state-of-the-art analysis procedures for steel frame buildings equipped with supplemental damping devices based on E-defense full-scale shake table tests.” J. Struct. Eng. 142 (6): 04016024. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001474.
Blomgren, H-E., S. Pei, Z. Jin, J. Powers, J. D. Dolan, J. W. van de Lindt, A. R. Barbosa, and D. Huang. 2019. “Full-scale shake table testing of cross-laminated timber rocking shear walls with replaceable components.” J. Struct. Eng. 145 (10): 04019115. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002388.
Borzouie, J., G. A. MacRae, J. G. Chase, G. W. Rodgers, and G. C. Clifton. 2015. “Experimental studies on cyclic performance of column base strong axis: Aligned asymmetric friction connections.” J. Struct. Eng. 142 (1): 04015078. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001327.
BSI (British Standards Institution). 2012. High tensile steel wire and strand for the prestressing of concrete: Specification. BS 5896:2012. London: BSI.
CEN (European Committee for Standardization). 2005a. Eurocode 3: Design of steel structures. 1-1: General rules and rules for buildings. EN 1993-1-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005b. Eurocode 3: Design of steel structures. 1-8: Design of joints. EN 1993-1-8. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005c. Eurocode 8: Design of structures for earthquake resistance. 1: General rules, seismic action and rules for buildings. EN 1998-1-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2008. Execution of steel structures and aluminum structures. 2: Technical requirements for steel structures. EN 1090-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2009. Metallic materials—Tensile testing. 1: Method of test at room temperature. EN ISO 6892-1. Brussels, Belgium: CEN.
Chi, H., and J. Liu. 2012. “Seismic behavior of post-tensioned column base for steel self-centering moment resisting frame.” J. Constr. Steel Res. 78 (Nov): 117–130. https://doi.org/10.1016/j.jcsr.2012.07.005.
Chou, C.-C., and J. H. Chen. 2011. “Analytical model validation and influence of column bases for seismic responses of steel post-tensioned self-centering MRF systems.” Eng. Struct. 33 (9): 2628–2643. https://doi.org/10.1016/j.engstruct.2011.05.011.
Coelho, A., F. Bijlaard, N. Gresnigt, and L. S. da Silva. 2004. “Experimental assessment of the behavior of bolted T-stub connections made up of welded plates.” J. Constr. Steel Res. 60 (2): 269–311. https://doi.org/10.1016/j.jcsr.2003.08.008.
Dimopoulos, A. I., A. S. Tzimas, T. L. Karavasilis, and D. Vamvatsikos. 2016. “Probabilistic economic seismic loss estimation in steel buildings using post-tensioned moment-resisting frames and viscous dampers.” Earthquake Eng. Struct. Dyn. 45 (11): 1725–1741. https://doi.org/10.1002/eqe.2722.
Dimopoulos, C., F. Freddi, and T. Karavasilis. 2020. “Progressive collapse resistance of steel self-centering MRFs including the effects of the composite floor.” Eng. Struct. 208 (Apr): 109923. https://doi.org/10.1016/j.engstruct.2019.109923.
FEMA. 2000. Recommended seismic design criteria for new steel moment-frame buildings. FEMA 350. Washington, DC: FEMA.
Freddi, F., C. A. Dimopoulos, and T. L. Karavasilis. 2017. “Rocking damage-free steel column base with friction devices: Design procedure and numerical evaluation.” Earthquake Eng. Struct. Dyn. 46 (14): 2281–2300. https://doi.org/10.1002/eqe.2904.
Freddi, F., E. Tubaldi, L. Ragni, and A. Dall’Asta. 2013. “Probabilistic performance assessment of low-ductility reinforced concrete frame retrofitted with dissipative braces.” Earthquake Eng. Struct. Dyn. 42 (7): 993–1011. https://doi.org/10.1002/eqe.2255.
Garlock, M., R. Sause, and J. M. Ricles. 2007. “Behavior and design of posttensioned steel frame systems.” J. Struct. Eng. 133 (3): 389–399. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(389).
Gioiella, L., E. Tubaldi, F. Gara, L. Dezi, and A. Dall’Asta. 2018. “Modal properties and seismic behaviour of buildings equipped with external dissipative pinned rocking braced frames.” Eng. Struct. 172 (Oct): 807–819. https://doi.org/10.1016/j.engstruct.2018.06.043.
Grauvilardell, J. E., D. Lee, J. F. Hajjar, and R. J. Dexter. 2006. Synthesis of design, testing and analysis research on steel column base plate connections in high-seismic zones. Minneapolis: Dept. of Civil Engineering, Univ. of Minnesota.
Grigorian, C. E., T. S. Yang, and E. P. Popov. 1993. “Slotted bolted connection energy dissipators.” Earthquake Spectra 9 (3): 491–504. https://doi.org/10.1193/1.1585726.
Haremza, C., A. Santiago, and L. S. da Silva. 2013. “Experimental behavior of heated composite steel–concrete joints subject to variable bending moments and axial forces.” Eng. Struct. 51 (Jun): 150–165. https://doi.org/10.1016/j.engstruct.2013.01.016.
Ikenaga, M., T. Nagae, M. Nakashima, and K. Suita. 2006. “Development of column bases having self-centering and damping capability.” In Proc., 5th Int. Conf. on Behaviour of Steel Structures in Seismic Areas (STESSA 2006), 703–708. London: Taylor & Francis.
Kamperidis, V. C., T. L. Karavasilis, and G. Vasdravellis. 2018. “Self-centering steel column base with metallic energy dissipation devices.” J. Constr. Steel Res. 149 (Oct): 14–30. https://doi.org/10.1016/j.jcsr.2018.06.027.
Kanvinde, A. M., D. A. Grilli, and F. Zareian. 2012. “Rotational stiffness of exposed column base connections: Experiments and analytical models.” J. Struct. Eng. 138 (5): 549–560. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000495.
Kelly, J. M., and D. F. Tsztoo. 1977. Earthquake simulation testing of a stepping frame with energy-absorbing devices. Oakland, CA: Earthquake Engineering Research Center.
Kim, H. J., and C. Christopoulos. 2008. “Seismic design procedure and seismic response of post-tensioned self-centering steel frames.” Earthquake Eng. Struct. Dyn. 38 (3): 355–376. https://doi.org/10.1002/eqe.859.
Latour, M., V. Piluso, and G. Rizzano. 2015. “Free from damage beam-to-column joints: Testing and design of DST connections with friction pads.” Eng. Struct. 85 (Feb): 219–233. https://doi.org/10.1016/j.engstruct.2014.12.019.
Latour, M., and G. Rizzano. 2013a. “Full strength design of column base connections accounting for random material variability.” Eng. Struct. 48 (Mar): 458–471. https://doi.org/10.1016/j.engstruct.2012.09.026.
Latour, M., and G. Rizzano. 2013b. “A theoretical model for predicting the rotational capacity of steel base joints.” J. Constr. Steel Res. 91 (Dec): 89–99. https://doi.org/10.1016/j.jcsr.2013.08.009.
Latour, M., G. Rizzano, A. Santiago, and L. S. da Silva. 2019. “Experimental response of a low-yielding, re-centering, rocking base plate joint with friction dampers.” Soil Dyn. Earthquake Eng. 116 (Jan): 580–592. https://doi.org/10.1016/j.soildyn.2018.10.011.
Mackinven, H., G. A. MacRae, S. Pampanin, G. C. Clifton, and J. Butterworth. 2007. “Generation four steel moment frame joints.” In Proc., 8th Pacific Conf. on Earthquake Engineering. Wellington, New Zealand: New Zealand Society for Earthquake Engineering.
MacRae, G. A., C. R. Urmson, W. R. Walpole, P. Moss, K. Hyde, and C. Clifton. 2009. “Axial shortening of steel columns in buildings subjected to earthquakes.” Bull. N. Z. Soc. Earthquake Eng. 42 (4): 275–287. https://doi.org/10.5459/bnzsee.42.4.275-287.
Rodas, P. T., F. Zareian, and A. Kanvinde. 2016. “Hysteretic model for exposed column-base connections.” J. Struct. Eng. 142 (12): 04016137. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001602.
Symans, M. D., F. A. Charney, A. S. Whittaker, M. C. Constantinou, C. A. Kircher, M. W. Johnson, and R. J. McNamara. 2008. “Energy dissipation systems for seismic applications: Current practice and recent developments.” J. Struct. Eng. 134 (1): 3–21. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(3).
Takamatsu, T., and H. Tamai. 2005. “Non-slip-type restoring force characteristics of an exposed-type column base.” J. Constr. Steel Res. 61 (7): 942–961. https://doi.org/10.1016/j.jcsr.2005.01.003.
Tzimas, A. S., G. S. Kamaris, T. L. Karavasilis, and C. Galasso. 2016. “Collapse risk and residual drift performance of steel buildings using post-tensioned MRFs and viscous dampers in near-fault regions.” Bull. Earthquake Eng. 14 (6): 1643–1662. https://doi.org/10.1007/s10518-016-9898-3.
Vasdravellis, G., T. L. Karavasilis, and B. Uy. 2013. “Large-scale experimental validation of steel posttensioned connections with web hourglass pins.” J. Struct. Eng. 139 (6): 1033–1042. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000696.
Wang, X. T., C. D. Xie, L. H. Lin, and J. Li. 2019. “Seismic behavior of self-centering concrete-filled square steel tubular (CFST) column base.” J. Constr. Steel Res. 156 (May): 75–85. https://doi.org/10.1016/j.jcsr.2019.01.025.
Wolski, M., J. Ricles, and R. Sause. 2009. “Experimental study of a self-centering beam–column connection with bottom flange friction device.” J. Struct. Eng. 135 (5): 479–488. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000006.
Yamanishi, T., K. Kasai, T. Takamatsu, and H. Tamai. 2012. “Innovative column-base details capable of tuning rigidity and strength for low to medium-rise steel structures.” In Proc., 15th World Conf. on Earthquake Engineering. Lisbon, Portugal: Sociedade Portuguesa de Engenharia Sismica.
Zareian, F., and A. Kanvinde. 2013. “Effect of column-base flexibility on the seismic response and safety of steel moment-resisting frames.” Earthquake Spectra 29 (4): 1537–1559. https://doi.org/10.1193/030512EQS062M.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Aug 26, 2019
Accepted: Apr 15, 2020
Published online: Jul 28, 2020
Published in print: Oct 1, 2020
Discussion open until: Dec 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.